Auto Parts Search

We have info for following modifications of 2008 Ford E-250
- 2008 Ford E-250 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2008 Ford E-250 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:L
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford E-250 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford E-250 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2008 Ford E-250 5.4 V8 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford E-250 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford E-250 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford E-250 cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2008 Ford E-250 5.4 V8 GAS
The TPMS (Tire Pressure Monitor System) monitors the air pressure of all 4 road tires. The wheel-mounted tire pressure sensors transmit via radio frequency signals, to the SJB (Smart Junction Box). TPMS functionality is integral to the SJB. These transmissions are sent approximately every 60 seconds when the vehicle speed exceeds 20 mph. The TPMS functi...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford E-250 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford E-250 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford E-250 cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2008 Ford E-250 5.4 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford E-250 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford E-250 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford E-250 cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams
Vehicle: 2008 Ford E-250 4.6 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford E-250 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford E-250 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford E-250 cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2008 Ford E-250 4.6 V8 GAS
The TPMS (Tire Pressure Monitor System) monitors the air pressure of all 4 road tires. The wheel-mounted tire pressure sensors transmit via radio frequency signals, to the SJB (Smart Junction Box). TPMS functionality is integral to the SJB. These transmissions are sent approximately every 60 seconds when the vehicle speed exceeds 20 mph. The TPMS functi...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford E-250 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford E-250 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford E-250 cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2008 Ford E-250 5.4 V8 GAS
If the system detects low tire pressure, CHECK TIRE PRESSURE lamp will illuminate. Inflating tire(s) to recommended pressure will clear the tire ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford E-250 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |