Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Ford F-150 car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Ford F-150 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Ford F-150
- 2008 Ford F-150 STX 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2008 Ford F-150 STX 4.2 V6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:2
- 2008 Ford F-150 XL 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2008 Ford F-150 XL 4.2 V6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:2
- 2008 Ford F-150 XL 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 XLT 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2008 Ford F-150 XLT 4.2 V6 GAS, CID:256, Fuel Injection, Aspiration:256, Engine VIN:, Desg:2
- 2008 Ford F-150 XLT 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 FX4 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 King Ranch 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 Lariat 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 HARLEY-DAVIDSON Edition 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 FX2 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 2008 Ford F-150 FX2 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 Limited 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-150 XLT 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2008 Ford F-150 XL 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2008 Ford F-150 Lariat 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2008 Ford F-150 King Ranch 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2008 Ford F-150 FX4 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
- 2008 Ford F-150 FX2 5.4 V8 FLEX, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:V
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford F-150 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford F-150 cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS Sensor -> TPMS Sensor Strap & Cradle
Vehicle: 2008 Ford F-150 Limited 5.4 V8 GAS
TPMS Sensor
Removal
Tire pressure sensors are manufactured in multiple colors based on their application. When installing a new sensor, make sure the color of the sensor being installed matches the color of the sensor that was removed. The different colored sensors are not interchangeable, Fig. .
- Loosen the wheel and tire assembly lug nuts.
- Raise and support the vehicle with jack stands.
- Remove the wheel and tire assembly.
- Position the wheel and tire assembly on a suitable tire changing machine as follows:
- On a paddle type tire machine, position the valve step at 12 o'clock or 6 ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-150 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford F-150 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford F-150 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2008 Ford F-150 Lariat 5.4 V8 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-150 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford F-150 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford F-150 cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS Sensor -> TPMS Sensor Strap & Cradle
Vehicle: 2008 Ford F-150 XLT 4.2 V6 GAS
TPMS Sensor
Removal
Tire pressure sensors are manufactured in multiple colors based on their application. When installing a new sensor, make sure the color of the sensor being installed matches the color of the sensor that was removed. The different colored sensors are not interchangeable, Fig. .
- Loosen the wheel and tire assembly lug nuts.
- Raise and support the vehicle with jack stands.
- Remove the wheel and tire assembly.
- Position the wheel and tire assembly on a suitable tire changing machine as follows:
- On a paddle type tire machine, position the valve step at 12 o'clock or 6 ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-150 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford F-150 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford F-150 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2008 Ford F-150 XL 4.6 V8 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-150 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford F-150 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford F-150 cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Ford F-150 Limited 5.4 V8 GAS
Refer to Fig. , for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-150 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford F-150 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford F-150 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2008 Ford F-150 FX2 5.4 V8 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-150 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Ford F-150 vehicle.
|
| Access the Complete guide! |
