Auto Parts Search
We have info for following modifications of 2008 Ford F-350 Super Duty
- 2008 Ford F-350 Super Duty XLT 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-350 Super Duty XLT 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-350 Super Duty XLT 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-350 Super Duty XL 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-350 Super Duty XL 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-350 Super Duty XL 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-350 Super Duty Lariat 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-350 Super Duty Lariat 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-350 Super Duty Lariat 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-350 Super Duty King Ranch 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-350 Super Duty King Ranch 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-350 Super Duty King Ranch 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-350 Super Duty FX4 5.4 V8 GAS, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:5
- 2008 Ford F-350 Super Duty FX4 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-350 Super Duty FX4 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2008 Ford F-350 Super Duty HARLEY-DAVIDSON Edition 6.8 V10 GAS, CID:415, Fuel Injection, Aspiration:415, Engine VIN:, Desg:Y
- 2008 Ford F-350 Super Duty HARLEY-DAVIDSON Edition 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford F-350 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford F-350 Super Duty cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2008 Ford F-350 Super Duty Lariat 5.4 V8 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 82 ft. lbs.
- Torque U-joint retainer bolts to 26 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-350 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford F-350 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford F-350 Super Duty cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2008 Ford F-350 Super Duty XL 6.4 V8 DIESEL
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 82 ft. lbs.
- Torque U-joint retainer bolts to 26 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-350 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford F-350 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford F-350 Super Duty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2008 Ford F-350 Super Duty Lariat 5.4 V8 GAS
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-350 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford F-350 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford F-350 Super Duty cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2008 Ford F-350 Super Duty XLT 5.4 V8 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 82 ft. lbs.
- Torque U-joint retainer bolts to 26 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-350 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford F-350 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford F-350 Super Duty cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2008 Ford F-350 Super Duty King Ranch 6.8 V10 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 82 ft. lbs.
- Torque U-joint retainer bolts to 26 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-350 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford F-350 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford F-350 Super Duty cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2008 Ford F-350 Super Duty XL 5.4 V8 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 82 ft. lbs.
- Torque U-joint retainer bolts to 26 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford F-350 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Ford F-350 Super Duty vehicle. |
Access the Complete guide! |