Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Ford Mustang car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Ford Mustang automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Ford Mustang
- 2008 Ford Mustang 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:N
- 2008 Ford Mustang GT 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:H
- 2008 Ford Mustang Bullitt 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:H
- 2008 Ford Mustang Shelby GT500 5.4 V8 GAS, CC:5409, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:S
- 2008 Ford Mustang Shelby GT 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:H
- 2008 Ford Mustang Shelby GT500KR 5.4 V8 GAS, CC:5409, CID:330, Fuel Injection, Aspiration:330, Engine VIN:, Desg:S
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Ford Mustang AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Ford Mustang cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Electronic Compass -> 2007-09 Mustang -> Calibration Adjustment -> Zone Adjustment
Vehicle: 2008 Ford Mustang Shelby GT500KR 5.4 V8 GAS
Zone Adjustment
- Determine compass magnetic zone, Fig. .
- Turn the ignition to the on position.
- Press and hold the control for no more than 6 seconds until the zone selection number appears in the mirror display window. If a C appears repeat this step.
- Release the control, then press it down again.
- Repeatedly press until your zone number is shown in the mirror display, then release.
- The display will show all segments, then return to normal compas...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Mustang MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Ford Mustang AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Ford Mustang cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Electronic Throttle Control ->
Vehicle: 2008 Ford Mustang Shelby GT 4.6 V8 GAS
Electronic throttle displays when the system has malfunctioned and the engine has defaulted to a limp-home operation. On vehicles equipped with ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Mustang MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Ford Mustang AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Ford Mustang cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Anti-Lock Brake Warning Lamp ->
Vehicle: 2008 Ford Mustang GT 4.6 V8 GAS
This lamp should light when the ignition is turned On. It may light for as long as 30 seconds as a bulb and system inspect. If the lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When the lamp is lit, turn ignition Off, then start...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Mustang MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Ford Mustang AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Ford Mustang cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Traction Control System Warning Lamp ->
Vehicle: 2008 Ford Mustang Shelby GT 4.6 V8 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Mustang MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Ford Mustang AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Ford Mustang cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Check Engine Lamp/Malfunction Indicator Lamp (MIL)/Service Engine Soon Lamp -> 2007-09 Models -> Keep Alive Memory (KAM) Reset & PCM Reset Less Electronic Tester -> PCM Reset Using Generic Scan Tool
Vehicle: 2008 Ford Mustang Shelby GT 4.6 V8 GAS
This lamp should light when the ignition is turned On. After engine starts, the lamp should go off, unless a fault condition is detected by the EEC-V system. If the lamp remains On or starts to blink, a diagnostic trouble code is stored in the PCM. Following diagnosis and repair, the Check Engine/MIL lamp will automatically reset when stored diagnostic trouble codes are cleared from PCM memory. The PCM reset procedure allows the scan tool to command the PCM to clear all diagnostic trouble codes.
The lamp illuminates when the ignition is first turned to the on position to check the...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Mustang MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Ford Mustang AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Ford Mustang cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Electronic Compass -> 2007-09 Mustang -> Calibration Adjustment -> Zone Adjustment
Vehicle: 2008 Ford Mustang Bullitt 4.6 V8 GAS
Zone Adjustment
- Determine compass magnetic zone, Fig. .
- Turn the ignition to the on position.
- Press and hold the control for no more than 6 seconds until the zone selection number appears in the mirror display window. If a C appears repeat this step.
- Release the control, then press it down again.
- Repeatedly press until your zone number is shown in the mirror display, then release.
- The display will show all segments, then return to normal compas...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Mustang MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Ford Mustang vehicle.
|
| Access the Complete guide! |
