Auto Parts Search
We have info for following modifications of 2008 GMC Yukon
- 2008 GMC Yukon Denali 6.2 V8 GAS, CC:6199, CID:378, Fuel Injection, Aspiration:378, Engine VIN:, Desg:8
- 2008 GMC Yukon SLE 5.3 V8 FLEX, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:0
- 2008 GMC Yukon SLE 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:J
- 2008 GMC Yukon SLE 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:C
- 2008 GMC Yukon SLT 5.3 V8 FLEX, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:0
- 2008 GMC Yukon SLT 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:J
- 2008 GMC Yukon Hybrid 6.0 V8 ELECTRIC/GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:Y
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One-Piece Driveshaft -> Rear -> Two-Piece Driveshaft
Vehicle: 2008 GMC Yukon SLT 5.3 V8 GAS
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include propeller shafts, wheel drive shafts, pinion flanges and output shafts.
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up expos...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One-Piece Driveshaft -> Rear -> Two-Piece Driveshaft
Vehicle: 2008 GMC Yukon Hybrid 6.0 V8 ELECTRIC/GAS
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include propeller shafts, wheel drive shafts, pinion flanges and output shafts.
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up expos...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One-Piece Driveshaft -> Rear -> Two-Piece Driveshaft
Vehicle: 2008 GMC Yukon SLT 5.3 V8 FLEX
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include propeller shafts, wheel drive shafts, pinion flanges and output shafts.
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up expos...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 GMC Yukon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 GMC Yukon SLE 4.8 V8 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove drive axle center cap, if equipped.
- Insert a drift or large screwdriver through brake caliper into one of the brake rotor vanes in order to prevent drive axle wheel drive shaft from turning.
- Remove nut and washer from hub. Do not reuse nut. A new nut must be used when installing wheel drive shaft.
- Using axle remover tool No. J 45859 or equivalent, press wheel drive shaft from hub.
- Remove bolts securing wheel drive s...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One-Piece Driveshaft -> Rear -> Two-Piece Driveshaft
Vehicle: 2008 GMC Yukon SLE 5.3 V8 FLEX
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include propeller shafts, wheel drive shafts, pinion flanges and output shafts.
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up expos...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One-Piece Driveshaft -> Rear -> Two-Piece Driveshaft
Vehicle: 2008 GMC Yukon SLE 5.3 V8 GAS
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include propeller shafts, wheel drive shafts, pinion flanges and output shafts.
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up expos...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 GMC Yukon vehicle. |
Access the Complete guide! |