Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Honda Civic car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Honda Civic automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Honda Civic
- 2008 Honda Civic DX 1.8 L4 GAS, CC:1799, Fuel Injection
- 2008 Honda Civic EX 1.8 L4 GAS, CC:1799, Fuel Injection
- 2008 Honda Civic LX 1.8 L4 GAS, CC:1799, Fuel Injection
- 2008 Honda Civic GX 1.8 L4 CNG, CC:1799, Fuel Injection
- 2008 Honda Civic SI 2.0 L4 GAS, CC:1998, Fuel Injection
- 2008 Honda Civic Hybrid 1.3 L4 ELECTRIC/GAS, CC:1339, Fuel Injection
- 2008 Honda Civic Mugen SI 2.0 L4 GAS, CC:1998, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Civic Mugen SI 2.0 L4 GAS
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer, if lefthand driveshaft is removed.
- Remove driveshaft outboard joint from wheel hub using plastic hammer.
- Remove nuts and bolts then separate lower control arm with suitable tool.
- Pull knuckle outward and remove driveshaft outboard joint from front whe...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Civic SI 2.0 L4 GAS
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer, if lefthand driveshaft is removed.
- Remove driveshaft outboard joint from wheel hub using plastic hammer.
- Remove nuts and bolts then separate lower control arm with suitable tool.
- Pull knuckle outward and remove driveshaft outboard joint from front whe...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Civic GX 1.8 L4 CNG
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Remove driveshaft outboard joint from wheel hub using plastic hammer.
- Remove nuts and bolts then separate lower control arm with suitable tool.
- Pull knuckle outward and remove driveshaft outboard joint from front wheel hub.
- Left drive...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Civic EX 1.8 L4 GAS
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Remove driveshaft outboard joint from wheel hub using plastic hammer.
- Remove nuts and bolts then separate lower control arm with suitable tool.
- Pull knuckle outward and remove driveshaft outboard joint from front wheel hub.
- Left drive...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Civic LX 1.8 L4 GAS
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Remove driveshaft outboard joint from wheel hub using plastic hammer.
- Remove nuts and bolts then separate lower control arm with suitable tool.
- Pull knuckle outward and remove driveshaft outboard joint from front wheel hub.
- Left drive...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Civic AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Civic cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Civic DX 1.8 L4 GAS
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Drain transmission fluid and reinstall drain plug using a new washer.
- Remove driveshaft outboard joint from wheel hub using plastic hammer.
- Remove nuts and bolts then separate lower control arm with suitable tool.
- Pull knuckle outward and remove driveshaft outboard joint from front wheel hub.
- Left drive...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Civic DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
