Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Honda Pilot car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Honda Pilot automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Honda Pilot
- 2008 Honda Pilot Value Package 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot Special Edition 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot Value Package 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot Special Edition 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX-L 3.5 V6 GAS, CC:3471, Fuel Injection
- 2008 Honda Pilot EX-L 3.5 V6 GAS, CC:3471, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Pilot cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Pilot EX-L 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut and discard nut.
- Drain transmission fluid and reinstall drain plug using new washer, if removing lefthand driveshaft. Do not drain transmission fluid if righthand driveshaft is removed.
- Remove stabilizer link nuts from dampner.
- Remove clip from lower am ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ball joint when...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Pilot cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Pilot EX-L 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut and discard nut.
- Drain transmission fluid and reinstall drain plug using new washer, if removing lefthand driveshaft. Do not drain transmission fluid if righthand driveshaft is removed.
- Remove stabilizer link nuts from dampner.
- Remove clip from lower am ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ball joint when...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Pilot cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Pilot EX 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut and discard nut.
- Drain transmission fluid and reinstall drain plug using new washer, if removing lefthand driveshaft. Do not drain transmission fluid if righthand driveshaft is removed.
- Remove stabilizer link nuts from dampner.
- Remove clip from lower am ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ball joint when...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Pilot cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Pilot Special Edition 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut and discard nut.
- Drain transmission fluid and reinstall drain plug using new washer, if removing lefthand driveshaft. Do not drain transmission fluid if righthand driveshaft is removed.
- Remove stabilizer link nuts from dampner.
- Remove clip from lower am ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ball joint when...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Pilot cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Pilot Value Package 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut and discard nut.
- Drain transmission fluid and reinstall drain plug using new washer, if removing lefthand driveshaft. Do not drain transmission fluid if righthand driveshaft is removed.
- Remove stabilizer link nuts from dampner.
- Remove clip from lower am ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ball joint when...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Honda Pilot AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Honda Pilot cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Honda Pilot Value Package 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut and discard nut.
- Drain transmission fluid and reinstall drain plug using new washer, if removing lefthand driveshaft. Do not drain transmission fluid if righthand driveshaft is removed.
- Remove stabilizer link nuts from dampner.
- Remove clip from lower am ball joint castle nut and remove nut. Avoid damaging ball joint and install ball joint thread protector onto threads of ball joint. Do not damage ball joint when...
CLICK HERE TO GET FULL ACCESS TO 2008 Honda Pilot DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
