Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 KIA Sorento car and truck
repair procedures including KIA engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 KIA Sorento automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 KIA Sorento
- 2008 KIA Sorento EX 3.8 V6 GAS, CC:3778, Fuel Injection
- 2008 KIA Sorento LX 3.3 V6 GAS, CC:3342, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Sorento AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Sorento cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Sorento LX 3.3 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and castle nut.
- Remove upper control arm link lock bolt and spring washer and nut.
- Remove tie rod end cotter pin and separate tie rod end from knuckle using suitable tool.
- Remove tie rod end from steering knuckle.
- Mark driveshaft to identify location during installation.
- Pry driveshaft ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Sorento DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Sorento AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Sorento cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Sorento EX 3.8 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and castle nut.
- Remove upper control arm link lock bolt and spring washer and nut.
- Remove tie rod end cotter pin and separate tie rod end from knuckle using suitable tool.
- Remove tie rod end from steering knuckle.
- Mark driveshaft to identify location during installation.
- Pry driveshaft ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Sorento DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



