Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 KIA Spectra car and truck
repair procedures including KIA engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 KIA Spectra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 KIA Spectra
- 2008 KIA Spectra SX 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:1
- 2008 KIA Spectra LX 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:1
- 2008 KIA Spectra EX 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:1
- 2008 KIA Spectra SX 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:2
- 2008 KIA Spectra LX 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:2
- 2008 KIA Spectra EX 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:2
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Spectra LX 2.0 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable tool ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Spectra SX 2.0 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable tool ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Spectra SX 2.0 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable tool ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Spectra EX 2.0 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable tool ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Spectra LX 2.0 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable tool ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 KIA Spectra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 KIA Spectra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 KIA Spectra EX 2.0 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove bolts securing wheel speed sensor from steering knuckle.
- Disconnect strut upper mounting bolts.
- Tap on driveshaft front hub assembly using plastic hammer.
- Push front hub assembly outward and separate driveshaft from hub assembly.
- Insert suitable tool ...
CLICK HERE TO GET FULL ACCESS TO 2008 KIA Spectra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 KIA Spectra vehicle.
|
| Access the Complete guide! |
