Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Land Rover LR2 car and truck
repair procedures including Land Rover engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Land Rover LR2 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Land Rover LR2
- 2008 Land Rover LR2 SE 3.2 L6 GAS, CC:3192, Fuel Injection, Engine VIN:, Desg:N
- 2008 Land Rover LR2 HSE 3.2 L6 GAS, CC:3192, Fuel Injection, Engine VIN:, Desg:N
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Land Rover LR2 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Land Rover LR2 SE 3.2 L6 GAS
- Disconnect battery ground cable. After switching off ignition, wait for 2 minutes before disconnecting battery. Failure to wait for 2 minutes will damage navigation computer.
- Raise and support front of vehicle. Do not work on or under a vehicle supported only by a jack. Always support vehicle on safety stands.
- Remove bo...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Land Rover LR2 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Land Rover LR2 HSE 3.2 L6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle. Do not work on or under a vehicle supported only by a jack. Always support vehicle on safety stands.
- Lower vehicle.
- Remove engine cover.
- Disconnect MAF sensor electrical connector.
- Loosen clamps and remove air cleaner outlet pipes.
- Remove air cleaner housing.
- Remove screws and MAF sensor.
- Remove air cleaner element.
- Remove bolts and engine undershield.
- Remove two lower intake manifold bolts.
- Disconnect throttle body electrical connector.
- Disconnect purge control valve (PCV) electrical connector.
- Disconnect fuel rail pressure (FR...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Land Rover LR2 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Land Rover LR2 HSE 3.2 L6 GAS
- Disconnect battery ground cable. After switching off ignition, wait for 2 minutes before disconnecting battery. Failure to wait for 2 minutes will damage navigation computer.
- Raise and support front of vehicle. Do not work on or under a vehicle supported only by a jack. Always support vehicle on safety stands.
- Remove bo...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Land Rover LR2 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Land Rover LR2 SE 3.2 L6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle. Do not work on or under a vehicle supported only by a jack. Always support vehicle on safety stands.
- Lower vehicle.
- Remove engine cover.
- Disconnect MAF sensor electrical connector.
- Loosen clamps and remove air cleaner outlet pipes.
- Remove air cleaner housing.
- Remove screws and MAF sensor.
- Remove air cleaner element.
- Remove bolts and engine undershield.
- Remove two lower intake manifold bolts.
- Disconnect throttle body electrical connector.
- Disconnect purge control valve (PCV) electrical connector.
- Disconnect fuel rail pressure (FR...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Land Rover LR2 vehicle.
|
| Access the Complete guide! |
