Auto Parts Search

We have info for following modifications of 2008 Mazda Tribute
- 2008 Mazda Tribute S 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2008 Mazda Tribute I 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2008 Mazda Tribute Hybrid 2.3 L4 ELECTRIC/GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:H
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Mazda Tribute AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Mazda Tribute cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Mazda Tribute I 2.3 L4 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and rear wheels.
- Drain differential oil in suitable container.
- Disconnect ABS wheel speed sensor.
- Re...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda Tribute DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Mazda Tribute AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Mazda Tribute cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Mazda Tribute Hybrid 2.3 L4 ELECTRIC/GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and rear wheels.
- Drain differential oil in suitable container.
- Disconnect ABS wheel speed sensor.
- Re...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda Tribute DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Mazda Tribute AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Mazda Tribute cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Mazda Tribute S 3.0 V6 GAS
- Place transmission in neutral, and raise and support vehicle.
- Remove wheel lug nuts and wheel.
- Remove from wheel axle hub nut.
- Separate lower control arm from front wheel knuckle.
- Remove nut and pinch bolt.
- Separate lower control arm from front wheel knuckle.
- ...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda Tribute DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |