Auto Parts Search
We have info for following modifications of 2008 MERCEDES-BENZ E350
- 2008 MERCEDES-BENZ E350 3.5 V6 GAS, CC:3498, Fuel Injection
- 2008 MERCEDES-BENZ E350 4matic 3.5 V6 GAS, CC:3498, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 MERCEDES-BENZ E350 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 MERCEDES-BENZ E350 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2008 MERCEDES-BENZ E350 3.5 V6 GAS
Front
- Raise and support vehicle.
- Remove righthand sensor, downstream of TWC.
- Match mark front propeller shaft relative to flange of front axle gear and to flange of transfer case.
- Detach front propeller shaft from flange of front axle gear.
- Detach front propeller shaft from flange of transfer case.
- Remove propeller shaft from front axle gear.
- Reverse procedure to install, noting the following:
- Torque flexible coupling to transfer case (M10) 108 in. lbs. (M12) 13 ft. lbs.
- Torque flexible coupling to front axle gear to (M10) 108 in. lbs. (M12) 13 ft. lbs.
Rear
- Raise and support vehicle.
- R...
CLICK HERE TO GET FULL ACCESS TO 2008 MERCEDES-BENZ E350 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 MERCEDES-BENZ E350 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 MERCEDES-BENZ E350 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Intermediate -> Rear
Vehicle: 2008 MERCEDES-BENZ E350 4matic 3.5 V6 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Unscrew hexagon collar bolt on front axle shaft.
- Detach lower engine compartment paneling.
- Press supporting joint out of steering knuckle.
- Press tie rod joint out of steering knuckle.
- Move steering knuckle out of supporting joint.
- Turn back of steering knuckle outwards and then pull outwards, while moving front axle shaft out of front axle shaft flange. Do not damage boots of front axle shaft and of supporting joint. If required, to loosen front axle shaft screw in hexagon-collar bolt again a few threads and drive out front ax...
CLICK HERE TO GET FULL ACCESS TO 2008 MERCEDES-BENZ E350 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 MERCEDES-BENZ E350 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 MERCEDES-BENZ E350 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Intermediate -> Rear
Vehicle: 2008 MERCEDES-BENZ E350 3.5 V6 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Unscrew hexagon collar bolt on front axle shaft.
- Detach lower engine compartment paneling.
- Press supporting joint out of steering knuckle.
- Press tie rod joint out of steering knuckle.
- Move steering knuckle out of supporting joint.
- Turn back of steering knuckle outwards and then pull outwards, while moving front axle shaft out of front axle shaft flange. Do not damage boots of front axle shaft and of supporting joint. If required, to loosen front axle shaft screw in hexagon-collar bolt again a few threads and drive out front ax...
CLICK HERE TO GET FULL ACCESS TO 2008 MERCEDES-BENZ E350 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 MERCEDES-BENZ E350 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 MERCEDES-BENZ E350 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2008 MERCEDES-BENZ E350 4matic 3.5 V6 GAS
Front
- Raise and support vehicle.
- Remove righthand sensor, downstream of TWC.
- Match mark front propeller shaft relative to flange of front axle gear and to flange of transfer case.
- Detach front propeller shaft from flange of front axle gear.
- Detach front propeller shaft from flange of transfer case.
- Remove propeller shaft from front axle gear.
- Reverse procedure to install, noting the following:
- Torque flexible coupling to transfer case (M10) 108 in. lbs. (M12) 13 ft. lbs.
- Torque flexible coupling to front axle gear to (M10) 108 in. lbs. (M12) 13 ft. lbs.
Rear
- Raise and support vehicle.
- R...
CLICK HERE TO GET FULL ACCESS TO 2008 MERCEDES-BENZ E350 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 MERCEDES-BENZ E350 vehicle. |
Access the Complete guide! |