Auto Parts Search
We have info for following modifications of 2008 Mitsubishi Eclipse
- 2008 Mitsubishi Eclipse GS 2.4 L4 GAS, CC:2378, Fuel Injection, Engine VIN:, Desg:F
- 2008 Mitsubishi Eclipse Spyder GS 2.4 L4 GAS, CC:2378, Fuel Injection, Engine VIN:, Desg:F
- 2008 Mitsubishi Eclipse GT 3.8 V6 GAS, CC:3828, CID:230, Fuel Injection, Aspiration:230, Engine VIN:, Desg:T
- 2008 Mitsubishi Eclipse Spyder GT 3.8 V6 GAS, CC:3828, CID:230, Fuel Injection, Aspiration:230, Engine VIN:, Desg:T
- 2008 Mitsubishi Eclipse SE 2.4 L4 GAS, CC:2378, Fuel Injection, Engine VIN:, Desg:F
- 2008 Mitsubishi Eclipse SE 3.8 V6 GAS, CC:3828, CID:230, Fuel Injection, Aspiration:230, Engine VIN:, Desg:T
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Eclipse AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Eclipse cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2008 Mitsubishi Eclipse SE 3.8 V6 GAS
Immediately after the ignition switch is placed in the On position, the MIL will light for 5 seconds to indicate proper operation. The MIL will illuminate to indicate an emission control item fault. After diagnosis and repair are complete, place the ignition switch in the Off position, then clear st...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Eclipse MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Eclipse AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Eclipse cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Traction Control System (TCS) Warning Lamp -> Except 2006-09 Raider
Vehicle: 2008 Mitsubishi Eclipse GS 2.4 L4 GAS
The TCS warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will flash when the TSC is activated...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Eclipse MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Eclipse AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Eclipse cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2008-09 Eclipse & Eclipse Spyder -> Relearn -> Reset -> Tire Pressure Sensor ID Registration -> Warning Lamp
Vehicle: 2008 Mitsubishi Eclipse GS 2.4 L4 GAS
Reset
Tire Pressure Sensor ID Registration
- Connect a suitable scan tool to vehicle data link connector, Fig. .
- Follow scan tool instructions to enter "Tire Pressure Sensor ID Registration" mode.
- Select the number of tires that you want to register.
- Starting at any TPMS transmitter, emit a signal from the transmitter as follows:
- Decrease the tire pressure to 25.2 psi or less by changing 2.9 psi or more, and register the TPMS transmitter ID code of each wheel to TPMS receiver
- Verify that a signal has been received by the TPMS rec...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Eclipse MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Eclipse AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Eclipse cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Anti-Lock Brake System (ABS) Warning Lamp -> Except 2006-09 Raider
Vehicle: 2008 Mitsubishi Eclipse GT 3.8 V6 GAS
The ABS warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the lamp remains lit,...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Eclipse MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Eclipse AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Eclipse cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Anti-Lock Brake System (ABS) Warning Lamp -> Except 2006-09 Raider
Vehicle: 2008 Mitsubishi Eclipse SE 2.4 L4 GAS
The ABS warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the lamp remains lit,...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Eclipse MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Eclipse AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Eclipse cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Anti-Lock Brake System (ABS) Warning Lamp -> Except 2006-09 Raider
Vehicle: 2008 Mitsubishi Eclipse GS 2.4 L4 GAS
The ABS warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the lamp remains lit,...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Eclipse MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Mitsubishi Eclipse vehicle. |
Access the Complete guide! |