Auto Parts Search
We have info for following modifications of 2008 Pontiac G8
- 2008 Pontiac G8 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
- 2008 Pontiac G8 GT 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:Y
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Pontiac G8 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Pontiac G8 cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Pontiac G8 3.6 V6 GAS
- Remove air cleaner
- Drain cooling system into suitable container.
- Remove lefthand and righthand engine mount struts.
- Remove inlet hose from radiator and PCM harness clip from fan shroud.
- Remove transaxle oil cooler lines from retainer clip at bottom of cooling fan shroud.
- Remove fan shroud clip from condenser tubes.
- Remove fan shroud to condenser hold down bracket bolt.
- Remove air deflectors from top of radiator.
- Remove cooling fan shroud bolts and coolant reservoir hose from radiator overflow neck.
- Remove ra...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac G8 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Pontiac G8 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Pontiac G8 cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Pontiac G8 GT 6.0 V8 GAS
- Lift locking levers, then disconnect Mass Air Flow (MAF) and Intake Air Temperature (IAT) sensors' electrical connectors.
- Loosen two clamps and remove intake duct.
- Drain cooling system into suitable container.
- Remove vapor hose from radiator fan shroud clips and radiator clamp, then position it aside.
- Remove vapor hose to surge tank clamp at radiator and position it aside.
- Remove five upper shroud to radiator retainers.
- Lift shroud on righthand side and release lefthand side locating tab.
- Loosen and remove radiator outlet hose from radiator and thermostat housing.
- Remove coolant vapor...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac G8 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Pontiac G8 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Pontiac G8 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Pontiac G8 GT 6.0 V8 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at heater pipe assembly using hose clamp pliers J 38185 or equivalent.
- Remove hose from heater pipe assembly.
- Disconnect heater inlet hose from underhood junction box retainer clip.
- Reposition heater hose inlet clamp at water pump using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from water pump...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac G8 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Pontiac G8 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Pontiac G8 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Pontiac G8 3.6 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove evaporator hose assembly.
- Remove condenser tube.
- Reposition heater hose inlet clamp at heater core using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at engine using hose clamp pliers J 38185 or equivalent.
- Remove hose from engine.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac G8 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Pontiac G8 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Pontiac G8 cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Pontiac G8 GT 6.0 V8 GAS
Lower
- Raise and support vehicle.
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from engine using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from engine and from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac G8 RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Pontiac G8 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Pontiac G8 cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Pontiac G8 3.6 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from thermostat housing using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from thermostat housing.
- Reposition hose clamp from radiator using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from radiator and from vehicle.
- Reverse procedure to ...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac G8 RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Pontiac G8 vehicle. |
Access the Complete guide! |