Auto Parts Search
We have info for following modifications of 2008 Saturn Aura
- 2008 Saturn Aura Green Line 2.4 L4 ELECTRIC/GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Saturn Aura XE 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Saturn Aura XE 3.5 V6 GAS, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:N
- 2008 Saturn Aura XR 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Saturn Aura XE 3.5 V6 GAS
- Drain the coolant.
- Loop a rope around each of upper two tabs of condenser and tie rope around upper tie bar.
- Remove bolt holding air cleaner outlet duct to upper front bumper fascia grille.
- Remove both front fender liners.
- Raise and support vehicle, then remove engine splash shields.
- Remove front bumper fascia bracket bolts. Access bolts through front fender liner openings.
- Remove front bumper fascia to tie bar bolts and retaining clips.
- Remove front bumper fascia to headlamp bolts.
- Disconnect any electrical connectors, then pull gently on fascia at fenders to disengage fascia from b...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2008 Saturn Aura Green Line 2.4 L4 ELECTRIC/GAS
Inlet
- Drain cooling system into a suitable container.
- Remove surge tank from surge tank bracket.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at engine.
- Remove hose from engine.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Drain cooling system into a suitable container.
- Remove surge tank from surge tank bracket.
- Reposition heater hose outlet clamp at heat...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Saturn Aura XE 3.5 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from thermostat cover.
- Remove radiator outlet hose from thermostat cover and from vehicle.
- Reverse pr...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Saturn Aura Green Line 2.4 L4 ELECTRIC/GAS
Lower
- Drain cooling system into a suitable container.
- Remove electronic control module (ECM).
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from thermostat cover.
- Remove radiator outlet hose from thermostat cover and from vehicle.
- Reverse procedure to inst...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Saturn Aura XE 2.4 L4 GAS
- Drain the coolant.
- Loop a rope around each of upper two tabs of condenser and tie rope around upper tie bar.
- Remove bolt holding air cleaner outlet duct to upper front bumper fascia grille.
- Remove both front fender liners.
- Raise and support vehicle, then remove engine splash shields.
- Remove front bumper fascia bracket bolts. Access bolts through front fender liner openings.
- Remove front bumper fascia to tie bar bolts and retaining clips.
- Remove front bumper fascia to headlamp bolts.
- Disconnect any electrical connectors, then pull gently on fascia at fenders to disengage fascia from b...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Saturn Aura XR 3.6 V6 GAS
- Drain the coolant.
- Loop a rope around each of upper two tabs of condenser and tie rope around upper tie bar.
- Remove bolt holding air cleaner outlet duct to upper front bumper fascia grille.
- Remove both front fender liners.
- Raise and support vehicle, then remove engine splash shields.
- Remove front bumper fascia bracket bolts. Access bolts through front fender liner openings.
- Remove front bumper fascia to tie bar bolts and retaining clips.
- Remove front bumper fascia to headlamp bolts.
- Disconnect any electrical connectors, then pull gently on fascia at fenders to disengage fascia from b...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Saturn Aura vehicle. |
Access the Complete guide! |