Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Saturn Aura car and truck
repair procedures including Saturn engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Saturn Aura automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Saturn Aura
- 2008 Saturn Aura Green Line 2.4 L4 ELECTRIC/GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Saturn Aura XE 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Saturn Aura XE 3.5 V6 GAS, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:N
- 2008 Saturn Aura XR 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Saturn Aura cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2008 Saturn Aura XE 3.5 V6 GAS
- Remove engine oil fill cap and intake manifold cover.
- Remove mounting bolts and lefthand inner fender brace.
- Loosen clamp and remove air cleaner outlet duct from throttle body.
- Disconnect Positive Crankcase Ventilation (PCV) tube from air inlet duct.
- Disconnect Mass Air Flow (MAF) sensor electrical connector.
- Remove upper from lower air cleaner housing.
- Remove Powertrain Control Module (PCM) and harness fr...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Saturn Aura cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 2008 Saturn Aura Green Line 2.4 L4 ELECTRIC/GAS
Removal
- Remove air cleaner assembly.
- Remove front fender inner lining and engine splash shield.
- Install a suitable hydraulic belt tensioner compressor tool, to drive belt tensioner spring.
- Rotate tensioner clockwise to release tension from drive belt.
- With tensioner released, remove drive belt from under middle idler pulley.
- Slowly rotate tensioner clockwise to allow tensioner to rest.
- Remove drive belt from drive belt tensioner.
Installati...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Saturn Aura cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2008 Saturn Aura XR 3.6 V6 GAS
- Remove air cleaner assembly.
- Remove engine mount strut to engine mount strut bracket bolts.
- Rotate engine mount strut to vertical position.
- Remove engine mount strut bracket bolts and strut bracket.
- ...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 2008 Saturn Aura cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 2008 Saturn Aura XE 2.4 L4 GAS
Removal
- Remove air cleaner assembly.
- Remove front fender inner lining and engine splash shield.
- Install a suitable hydraulic belt tensioner compressor tool, to drive belt tensioner spring.
- Rotate tensioner clockwise to release tension from drive belt.
- With tensioner released, remove drive belt from under middle idler pulley.
- Slowly rotate tensioner clockwise to allow tensioner to rest.
- Remove drive belt from drive belt tensioner.
Installati...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura SERPENTINE BELT SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Saturn Aura vehicle.
|
| Access the Complete guide! |
