Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Acura RDX car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Acura RDX automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Acura RDX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Acura RDX cars and light trucks sold in the U.S. from 1990+.
Acura -> Maintenance Required Lamp -> 2007-09 RDX -> With Information Display -> With Multi-Information Display
Vehicle: 2009 Acura RDX 2.3 L4 GAS
With Multi-Information Display
The vehicle must be stopped to reset the maintenance information display.
- Place the ignition switch in the on position. If messages are displayed, press info button to cancel.
- Press and release the SEL/RESET button until Engine Oil Life Indicator is displayed, Fig. .
- Press and hold SEL/RESET button for approximately 10 seconds until display indicates Oil Life Reset .
- Press INFO button repeatedly until display indicates Reset, then press the SEL/RESET button.
- The maintenance item code(s) will be di...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura RDX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Acura RDX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Acura RDX cars and light trucks sold in the U.S. from 1990+.
Acura -> Vehicle Stability Assist (VSA) System Warning Lamp -> 2007-09 RDX
Vehicle: 2009 Acura RDX 2.3 L4 GAS
The VSA warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the activation indicator may come on if the VSA switch has been manually turned O...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura RDX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Acura RDX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Acura RDX cars and light trucks sold in the U.S. from 1990+.
Acura -> Information System Display ->
Vehicle: 2009 Acura RDX 2.3 L4 GAS
This system will indicate driver information and service interval reminder information. The system will normally indicate the clock display until the trip function or system check buttons are depressed. When the trip function button is depressed, the system will indicate fuel remaining, trip meter, present fuel consumption and average fuel consumption. When the system check button is depressed, the display will indicate next service interval, engine oil and filter service interval, oil level, coolant level and washer fluid level. A warning lamp on the instrument cluster will be illuminated whe...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura RDX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Acura RDX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Acura RDX cars and light trucks sold in the U.S. from 1990+.
Acura -> Side Air Bag off Lamp ->
Vehicle: 2009 Acura RDX 2.3 L4 GAS
This indicator should light for a few seconds when the ignition switch placed in the on position and then go Off. The lamp is used a an alert that the passenger side air bag has been automatically shut off. The passenger side air bag w...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura RDX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Acura RDX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Acura RDX cars and light trucks sold in the U.S. from 1990+.
Acura -> Automatic Transmission (A/T) Fluid Temperature Indicator -> 2007-09 RDX
Vehicle: 2009 Acura RDX 2.3 L4 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in on position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off th...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura RDX MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Acura RDX AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Acura RDX cars and light trucks sold in the U.S. from 1990+.
Acura -> Check Engine/Malfunction Indicator (MIL)/PGM-FI Warning Indicator Lamp -> 2007-09 RDX
Vehicle: 2009 Acura RDX 2.3 L4 GAS
The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for a few seconds after the ignition switch is placed in the on position as a bulb check and then the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble codes.
After diagnosis and repair, clear the ECU memory of diagnostic trouble codes. With ignition switch in ...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura RDX MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
