Auto Parts Search
2009 Acura TL CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Acura REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Acura TL AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2009 Acura TL SH-AWD 3.7 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Lift up locking tab on spindle nut then remove nut.
- Remove bolts securing splash shield.
- Drain transmission fluid, then reinstall drain plug using new washer.
- Remove self-locking nut with 12mm dampner fork mounting bolt. and 10mm dampner pinch bolt then remove dampner fork.
- Hold stabilizer ball joint pin with hex wrench and remove flange nut then separate from stabilizer link from lower arm.
- Remove cotter pin from lower arm ball joint castle nut and remove nut the...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Acura TL AUTOMOBILES
Component Replacement -> Front -> Installation -> Rear -> Removal -> Tire Pressure Sensor -> TPMS Control Unit -> TPMS Initiator
Vehicle: 2009 Acura TL 3.5 V6 GAS
Tire Pressure Sensor
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Remove the valve cap and core.
- Deflate the tire completely.
- Remove any balance weights.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Do outside of wheel first.
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Do not position the bead breaker of the tire changer too close to the rim.
- Position the wheel so the tire machine and tire iron are next to the valve stem an...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Acura TL AUTOMOBILES
Starter, Replace
Vehicle: 2009 Acura TL SH-AWD 3.7 V6 GAS
- Remove engine cover.
- Remove battery ground terminal from battery.
- Remove battery base.
- Remove air intake duct splash separator.
- Remove starter wiring harness clamp.
- Disconnect positive starter cable from B+ terminal, then disconnect connector from S terminal.
- Remove upper radiator hose bracket and dipstick.
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Acura TL AUTOMOBILES
Cabin Air Filter Service -> Acura -> 2009 TL & TSX
Vehicle: 2009 Acura TL 3.5 V6 GAS
The cabin air filter should be replaced at Maintenance Minder Indicator Symbol 2. If the vehicle is operated primarily in urban areas with high concentrations of soot and diesel powered vehicles, replace the filter every 15,000 miles. The filter should be replaced more often if air flow is less than normal.
- Open the glove compartment.
- Remove the glove compartment separator by pulling straight back, Fig. .
- Release the cabin ai...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Acura TL AUTOMOBILES
Acura -> Automatic Transmission (A/T) Fluid Temperature Indicator -> 2004-09 TL
Vehicle: 2009 Acura TL SH-AWD 3.7 V6 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in on position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off the...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Acura TL AUTOMOBILES
Radiator, Replace
Vehicle: 2009 Acura TL 3.5 V6 GAS
- Disconnect negative battery cable.
- Drain engine coolant into a suitable container.
- Remove right side fender trim.
- Raise and support vehicle.
- Remove splash shield.
- Disconnect lower radiator hose.
- Disconnect automatic transmission fluid (ATF) cooler hoses, then plug hose and line.
- Disconnect engine coolant temperature (ECT) sensor two connector.
- Lower vehicle.
- Disconnect upper radiator ...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Acura TL AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Acura TL SH-AWD 3.7 V6 GAS
- Remove engine compartment covers.
- Rotate tensioner counterclockwise using suit...
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Acura TL AUTOMOBILES
OEM TSB listings for most 2009 Acura TL cars and light trucks sold in the U.S. from 1985+.
Document: AcuraLink Control Unit (XM Receiver) In-Warranty Exchange/Out-of-Warranty Repair Vehicle: 2009 Acura TL 3.5 V6 GAS |
Document: Battery Maintenance at Dealers Vehicle: 2009 Acura TL 3.5 V6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Acura TL AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Acura TL cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Acura TL cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Acura TL cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Acura TL cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Acura TL SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Acura TL vehicle. |
Access the Complete guide! |