Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 BMW X6 car and truck
repair procedures including BMW engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 BMW X6 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 BMW X6
- 2009 BMW X6 XDRIVE35I 3.0 L6 GAS, CC:2979, Fuel Injection
- 2009 BMW X6 XDRIVE50I 4.4 V8 GAS, CC:4395, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 BMW X6 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 BMW X6 cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 BMW X6 XDRIVE50I 4.4 V8 GAS
Do not move vehicle with engine power once driveline shaft has been removed.
- Remove complete exhaust system bolts and nuts.
- Remove rear heat shield.
- Remove bolts from transmission companion flange.
- Remove driveshaft rear axle nuts.
- Press constant velocity joint off drive flange using suitable tool. Do not let driveline shaft fall into joints. Joints and rubber sleeve can be damaged on constant velocity joint.
- Grip driveline shaft at center b...
CLICK HERE TO GET FULL ACCESS TO 2009 BMW X6 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 BMW X6 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 BMW X6 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2009 BMW X6 XDRIVE50I 4.4 V8 GAS
Front
The CV drive shafts differ in length. If required, mark CV drive shafts. The left CV drive shaft is shorter than the right CV drive shaft.
- Raise vehicle on lift.
- Remove front wheel lug nuts.
- Remove reinforcement plate.
- Remove engine undercover at front. There is no need to perform a front axle alignment check.
- Remove ABS pulse generator.
- Remove brake caliper and tie back.
- Force steering tie rod off swivel bearing.
- Remove tension strut with guide joint from swivel bearing.
- Remove control arm...
CLICK HERE TO GET FULL ACCESS TO 2009 BMW X6 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 BMW X6 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 BMW X6 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2009 BMW X6 XDRIVE35I 3.0 L6 GAS
Front
The CV drive shafts differ in length. If required, mark CV drive shafts. The left CV drive shaft is shorter than the right CV drive shaft.
- Raise vehicle on lift.
- Remove front wheel lug nuts.
- Remove reinforcement plate.
- Remove engine undercover at front. There is no need to perform a front axle alignment check.
- Remove ABS pulse generator.
- Remove brake caliper and tie back.
- Force steering tie rod off swivel bearing.
- Remove tension strut with guide joint from swivel bearing.
- Remove control arm...
CLICK HERE TO GET FULL ACCESS TO 2009 BMW X6 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 BMW X6 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 BMW X6 cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 BMW X6 XDRIVE35I 3.0 L6 GAS
Do not move vehicle with engine power once driveline shaft has been removed.
- Remove complete exhaust system bolts and nuts.
- Remove rear heat shield.
- Remove bolts from transmission companion flange.
- Remove driveshaft rear axle nuts.
- Press constant velocity joint off drive flange using suitable tool. Do not let driveline shaft fall into joints. Joints and rubber sleeve can be damaged on constant velocity joint.
- Grip driveline shaft at center b...
CLICK HERE TO GET FULL ACCESS TO 2009 BMW X6 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 BMW X6 vehicle.
|
| Access the Complete guide! |
