Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 GMC Yukon car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 GMC Yukon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 GMC Yukon
- 2009 GMC Yukon Denali 6.2 V8 FLEX, CID:376, Fuel Injection, Aspiration:376, Engine VIN:, Desg:2
- 2009 GMC Yukon SLE 5.3 V8 FLEX, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:0
- 2009 GMC Yukon SLE 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:J
- 2009 GMC Yukon SLE 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:C
- 2009 GMC Yukon SLT 5.3 V8 FLEX, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:0
- 2009 GMC Yukon SLT 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:J
- 2009 GMC Yukon Hybrid 6.0 V8 ELECTRIC/GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:5
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 2009 GMC Yukon SLT 5.3 V8 GAS
Front
Remove
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include the following components:
- Propeller shafts
- Wheel drive shafts
- Pinion flanges
- Output shafts
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer ca...
CLICK HERE TO GET FULL ACCESS TO 2009 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 GMC Yukon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2009 GMC Yukon SLE 4.8 V8 GAS
Remove
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove drive axle center cap, if equipped.
- Insert a drift or large screwdriver through brake caliper into one of the brake rotor vanes in order to prevent drive axle wheel drive shaft from turning.
- Remove nut and washer from hub. Do not reuse nut. A new nut must be used when installing wheel drive shaft.
- Using J 45859 or equivalent, press wheel drive shaft from hub.
- Remove bolts securing wheel drive shaft inboard flange to output shaft flange.
- Remove drift from rotor.
- Remove stabilizer shaft link from lower control ...
CLICK HERE TO GET FULL ACCESS TO 2009 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 GMC Yukon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2009 GMC Yukon SLT 5.3 V8 FLEX
Remove
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove drive axle center cap, if equipped.
- Insert a drift or large screwdriver through brake caliper into one of the brake rotor vanes in order to prevent drive axle wheel drive shaft from turning.
- Remove nut and washer from hub. Do not reuse nut. A new nut must be used when installing wheel drive shaft.
- Using J 45859 or equivalent, press wheel drive shaft from hub.
- Remove bolts securing wheel drive shaft inboard flange to output shaft flange.
- Remove drift from rotor.
- Remove stabilizer shaft link from lower control ...
CLICK HERE TO GET FULL ACCESS TO 2009 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 2009 GMC Yukon Hybrid 6.0 V8 ELECTRIC/GAS
CLICK HERE TO GET FULL ACCESS TO 2009 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 GMC Yukon cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 2009 GMC Yukon SLT 5.3 V8 FLEX
CLICK HERE TO GET FULL ACCESS TO 2009 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 GMC Yukon AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 GMC Yukon cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2009 GMC Yukon Hybrid 6.0 V8 ELECTRIC/GAS
Remove
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove drive axle center cap, if equipped.
- Insert a drift or large screwdriver through brake caliper into one of the brake rotor vanes in order to prevent drive axle wheel drive shaft from turning.
- Remove nut and washer from hub. Do not reuse nut. A new nut must be used when installing wheel drive shaft.
- Using J 45859 or equivalent, press wheel drive shaft from hub.
- Remove bolts securing wheel drive shaft inboard flange to output shaft flange.
- Remove drift from rotor.
- Remove stabilizer shaft link from lower control ...
CLICK HERE TO GET FULL ACCESS TO 2009 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
