Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Honda FIT car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Honda FIT automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Honda FIT
- 2009 Honda FIT Sport 1.5 L4 GAS, CC:1497, Fuel Injection
- 2009 Honda FIT 1.5 L4 GAS, CC:1497, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Honda FIT AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Honda FIT cars and light trucks sold in the U.S. from 1990+.
Honda -> Check Engine Lamp -> 2007-09 Fit
Vehicle: 2009 Honda FIT 1.5 L4 GAS
The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for a few seconds after the ignition switch is placed in the on position as a bulb check and then the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble codes.
After diagnosis and repair, clear the ECU memory of diagnostic trouble codes. With ignition switch ...
CLICK HERE TO GET FULL ACCESS TO 2009 Honda FIT MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Honda FIT AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Honda FIT cars and light trucks sold in the U.S. from 1990+.
Honda -> Maintenance Required Lamp -> 2007-09 Fit
Vehicle: 2009 Honda FIT 1.5 L4 GAS
- Turn ignition On.
- Press trip meter SELECT/RESET button repeatedly until engine oil life indicator is displayed, Fig. .
- Press and hold SELECT/RESET button for approximately 10 seconds until the engine oil l...
CLICK HERE TO GET FULL ACCESS TO 2009 Honda FIT MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Honda FIT AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Honda FIT cars and light trucks sold in the U.S. from 1990+.
Honda -> Side Air Bag Off Lamp ->
Vehicle: 2009 Honda FIT Sport 1.5 L4 GAS
This indicator should light for a few seconds when the ignition switch placed in the On position and then go Off. The lamp is used a an alert that the passenger side air bag has been automatically shut off. The passenger side air bag w...
CLICK HERE TO GET FULL ACCESS TO 2009 Honda FIT MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Honda FIT AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Honda FIT cars and light trucks sold in the U.S. from 1990+.
Honda -> Vehicle Stability Assist (VSA) System Warning Lamp -> 2009 Fit
Vehicle: 2009 Honda FIT 1.5 L4 GAS
The VSA warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the activation indicator may come on if the VSA switch has been manually turned ...
CLICK HERE TO GET FULL ACCESS TO 2009 Honda FIT MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Honda FIT AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Honda FIT cars and light trucks sold in the U.S. from 1990+.
Honda -> Automatic Transmission D, D4 Or D5 Indicator Lamp -> 2007-09 Fit
Vehicle: 2009 Honda FIT 1.5 L4 GAS
When the PCM detects an abnormal automatic transmission input or output signal the D lamp will usually blink and or the MIL will be illuminated. After completing diagnosis and repairs, reset the D and or MIL as follows:
- With...
CLICK HERE TO GET FULL ACCESS TO 2009 Honda FIT MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Honda FIT AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2009 Honda FIT cars and light trucks sold in the U.S. from 1990+.
Honda -> Anti-Lock Brake System (ABS)/VSA System Warning Lamp -> 2007-09 Fit
Vehicle: 2009 Honda FIT Sport 1.5 L4 GAS
The ABS warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the indicator may come on if the vehicle goes into a spin, one...
CLICK HERE TO GET FULL ACCESS TO 2009 Honda FIT MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Honda FIT vehicle.
|
| Access the Complete guide! |
