Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 KIA Borrego car and truck
repair procedures including KIA engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 KIA Borrego automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 KIA Borrego
- 2009 KIA Borrego LX 3.8 V6 GAS, CC:3778, Fuel Injection, Engine VIN:, Desg:1
- 2009 KIA Borrego LX 4.6 V8 GAS, CC:4627, Fuel Injection, Engine VIN:, Desg:2
- 2009 KIA Borrego EX 3.8 V6 GAS, CC:3778, Fuel Injection, Engine VIN:, Desg:1
- 2009 KIA Borrego EX 4.6 V8 GAS, CC:4627, Fuel Injection, Engine VIN:, Desg:2
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 KIA Borrego AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 KIA Borrego cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 KIA Borrego LX 4.6 V8 GAS
- Raise and support vehicle.
- Remove wheel lug nuts.
- Remove split pin, then remove castle nut and washer from front hub.
- Remove mounting bolt of rear lower arm and rear carrier, while supporting lower arm with a jack.
- Remove spring, upper pad and lower pad.
- Remove shock absorber.
- Remove assist arm and trailing arm from rear axle carrier.
- Remove rear stabilizer li...
CLICK HERE TO GET FULL ACCESS TO 2009 KIA Borrego DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 KIA Borrego AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 KIA Borrego cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 KIA Borrego LX 3.8 V6 GAS
- Raise and support vehicle.
- Remove wheel lug nuts.
- Remove split pin, then remove castle nut and washer from front hub.
- Remove mounting bolt of rear lower arm and rear carrier, while supporting lower arm with a jack.
- Remove spring, upper pad and lower pad.
- Remove shock absorber.
- Remove assist arm and trailing arm from rear axle carrier.
- Remove rear stabilizer li...
CLICK HERE TO GET FULL ACCESS TO 2009 KIA Borrego DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 KIA Borrego AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 KIA Borrego cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 KIA Borrego EX 3.8 V6 GAS
- Raise and support vehicle.
- Remove wheel lug nuts.
- Remove split pin, then remove castle nut and washer from front hub.
- Remove mounting bolt of rear lower arm and rear carrier, while supporting lower arm with a jack.
- Remove spring, upper pad and lower pad.
- Remove shock absorber.
- Remove assist arm and trailing arm from rear axle carrier.
- Remove rear stabilizer li...
CLICK HERE TO GET FULL ACCESS TO 2009 KIA Borrego DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 KIA Borrego AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 KIA Borrego cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 KIA Borrego EX 4.6 V8 GAS
- Raise and support vehicle.
- Remove wheel lug nuts.
- Remove split pin, then remove castle nut and washer from front hub.
- Remove mounting bolt of rear lower arm and rear carrier, while supporting lower arm with a jack.
- Remove spring, upper pad and lower pad.
- Remove shock absorber.
- Remove assist arm and trailing arm from rear axle carrier.
- Remove rear stabilizer li...
CLICK HERE TO GET FULL ACCESS TO 2009 KIA Borrego DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
