Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Suzuki Equator car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Suzuki Equator automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Suzuki Equator
- 2009 Suzuki Equator Sport 4.0 V6 GAS, CC:3954, Fuel Injection
- 2009 Suzuki Equator 2.5 L4 GAS, CC:2500, Fuel Injection
- 2009 Suzuki Equator 4.0 V6 GAS, CC:3954, Fuel Injection
- 2009 Suzuki Equator Premium 2.5 L4 GAS, CC:2500, Fuel Injection
- 2009 Suzuki Equator RMZ-4 4.0 V6 GAS, CC:3954, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Suzuki Equator AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Suzuki Equator cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2009 Suzuki Equator Sport 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove undercover using suitable tool.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 80 ft. lbs.
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 Suzuki Equator DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Suzuki Equator AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Suzuki Equator cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2009 Suzuki Equator Premium 2.5 L4 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove undercover using suitable tool.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 80 ft. lbs.
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 Suzuki Equator DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Suzuki Equator AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Suzuki Equator cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Suzuki Equator Sport 4.0 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove engine undercover bolts using suitable tool.
- Remove brake caliper torque member bolts using suitable tool. Position brake caliper aside and attach using mechanics wire.Do not press down on brake pedal while caliper is removed.
- Place alignment mark on brake disc, wheel hub and bearing assembly, then remove disc rotor.
- On models equipped with 4WD, remove cotter pin, then remove locknut from driveshaft using suitable tool.
- On all models, remove end of drive...
CLICK HERE TO GET FULL ACCESS TO 2009 Suzuki Equator DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Suzuki Equator AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Suzuki Equator cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Suzuki Equator 4.0 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove engine undercover bolts using suitable tool.
- Remove brake caliper torque member bolts using suitable tool. Position brake caliper aside and attach using mechanics wire.Do not press down on brake pedal while caliper is removed.
- Place alignment mark on brake disc, wheel hub and bearing assembly, then remove disc rotor.
- On models equipped with 4WD, remove cotter pin, then remove locknut from driveshaft using suitable tool.
- On all models, remove end of drive...
CLICK HERE TO GET FULL ACCESS TO 2009 Suzuki Equator DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Suzuki Equator AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Suzuki Equator cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Suzuki Equator 2.5 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove engine undercover bolts using suitable tool.
- Remove brake caliper torque member bolts using suitable tool. Position brake caliper aside and attach using mechanics wire.Do not press down on brake pedal while caliper is removed.
- Place alignment mark on brake disc, wheel hub and bearing assembly, then remove disc rotor.
- On models equipped with 4WD, remove cotter pin, then remove locknut from driveshaft using suitable tool.
- On all models, remove end of drive...
CLICK HERE TO GET FULL ACCESS TO 2009 Suzuki Equator DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Suzuki Equator AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Suzuki Equator cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2009 Suzuki Equator 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove undercover using suitable tool.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 80 ft. lbs.
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 Suzuki Equator DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
