Auto Parts Search
2009 Toyota Camry CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Toyota REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Toyota Camry AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2009 Toyota Camry XLE 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transaxle oil in suitable container.
- Unstake wheel hub nut using suitable tool but do not remove nut.
- Apply brakes and remove lefthand driveline nut.
- Remove nut and separate lefthand front stabilizer link assembly. If ball joint turns together with nut use 6mm tool to hold stud.
- Disconnect ABS wheel speed sensor and remove bolt securing lefthand flexible hose from shock absorber.
- Remove bolt and separate speed sensor from lefthand steering knuckle.
- Remove tie...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Camry AUTOMOBILES
Description
Vehicle: 2009 Toyota Camry XLE 2.4 L4 GAS
A tire pressure sensor and transmitter assembly is installed in each tire and wheel assembly. The sensor measures the tire pressure. The measured tire pressure and transmitter identification are transmitted as radio waves to the TPMS (Tire Pressure Monitor System) warning antenna and receiver on the body. From the receiver the signal is sent to the TPMS ECU (Electronic Control Uni...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Toyota Camry AUTOMOBILES
Alternator, Replace
Vehicle: 2009 Toyota Camry XLE 3.5 V6 GAS
- Disconnect battery ground cable from battery.
- Remove righthand front wheel.
- Remove righthand front fender apron seal.
- Remove right and lefthand front wheel opening extension pads.
- Remove right and lefthand engine under covers.
- Drain engine coolant into a suitable container.
- Remove V-bank cover sub-assembly.
- Remove cool air intake duct seal.
- Remove air cleaner inlet assembly.
- Remove air cleaner cap sub-assembly.
- Remove air cleaner inlet.
- Remove front bumper assembly.
- Remove front bumper energy absorber.
- Separate radiator reserve tank hose.
- Separate radiator inlet hose.
- Separate radiator out...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Toyota Camry AUTOMOBILES
Cabin Air Filter Service -> Toyota -> 2007-09 Camry
Vehicle: 2009 Toyota Camry LE 3.5 V6 GAS
The cabin air filter should be cleaned every 18 months or 15,000 miles and replaced every 36 months or 30,000 miles. The filter should be replaced more often if air flow is less than normal.
- Open the glove compartment door, then slide off the damper rod, Fig. .
- Apply pressure to the glove compartment to disengage the claws.
- Remove the cabin air filter cover while pushing i...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Toyota Camry AUTOMOBILES
Toyota -> Low Coolant Lamp ->
Vehicle: 2009 Toyota Camry LE 3.5 V6 GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Camry AUTOMOBILES
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2009 Toyota Camry SE 3.5 V6 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at thermostat housing.
- Remove hose from thermostat housing.
- Remove hose from vehicle.
- Reverse proc...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Toyota Camry AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Toyota Camry SE 3.5 V6 GAS
- Rotate or lift the belt tensioner arm, using a suitable tool to relieve tension from dr...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Toyota Camry AUTOMOBILES
OEM TSB listings for most 2009 Toyota Camry cars and light trucks sold in the U.S. from 1985+.
Document: MIL "ON" DTC P1423 Vehicle: 2009 Toyota Camry Hybrid 2.4 L4 ELECTRIC/GAS Auto Systems: |
Document: Sliding Roof Pop Noise When Opening Vehicle: 2009 Toyota Camry LE 3.5 V6 GAS Symptoms: |
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Toyota Camry AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Toyota Camry cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Toyota Camry cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Toyota Camry cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Toyota Camry cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Camry SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Toyota Camry vehicle. |
Access the Complete guide! |