Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Toyota Corolla car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Toyota Corolla automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Toyota Corolla
- 2009 Toyota Corolla LE 1.8 L4 GAS, CC:1798, Fuel Injection
- 2009 Toyota Corolla LE 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
- 2009 Toyota Corolla 1.8 L4 GAS, CC:1798, Fuel Injection
- 2009 Toyota Corolla 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
- 2009 Toyota Corolla XLE 1.8 L4 GAS, CC:1798, Fuel Injection
- 2009 Toyota Corolla XLE 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
- 2009 Toyota Corolla S 1.8 L4 GAS, CC:1798, Fuel Injection
- 2009 Toyota Corolla S 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
- 2009 Toyota Corolla XRS 2.4 L4 GAS, CC:2362, Fuel Injection
- 2009 Toyota Corolla CE 1.8 L4 GAS, CC:1798, Fuel Injection
- 2009 Toyota Corolla CE 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Corolla AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Corolla cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS ECU -> TPMS Pressure Warning Valve & Transmitter -> TPMS Receiver -> TPMS Reset Switch
Vehicle: 2009 Toyota Corolla CE 1.8 L4 GAS
TPMS Pressure Warning Valve & Transmitter
If installing a replacement tire pressure warning valve and transmitter, note the identification number for use during registration. Refer to the Registration under the "Relearn Procedures."
Removal
- Loosen the wheel lug nuts.
- Raise and support vehicle with jack stands.
- Remove the wheel and tire assembly.
- Remove the tire valve stem cap, then the valve stem core and allow the tire to deflate, Fig. .
- Remove the nut retaining the tire pressure warning valve and transmitter to the wheel assembly, then drop the transmitter inside the tire.
- Using a...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Corolla TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Corolla AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Corolla cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2009 Toyota Corolla CE 1.8 L4 GAS
Refer toFigs. and for wir...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Corolla TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Corolla AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Corolla cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing DTCs (Diagnostic Trouble Codes) -> Diagnostic Trouble Code Identification -> Reset Switch Test -> Using Scan Tool -> Using TPMS Warning Lamp
Vehicle: 2009 Toyota Corolla XRS 2.4 L4 GAS
Accessing Diagnostic Trouble Codes
Using TPMS Warning Lamp
- Place the ignition switch in the Off position.
- Using Toyota SST or other suitable jumper, connect terminals TC and CG of DLC3. The DLC3 is located under the left side of the instrument panel, Fig. .
- Place the ignition switch in the On position.
- Read and note DTCs indicated by flashes of the TPMS warning lamp, Fig. .
- If the TPMS warning lamp blinks in .25 second intervals, a normal condition is indicated, Fig. .
- If the TPMS warning lamp blinks in .5 second intervals followed by a 1.5 second pause, then additional .5 second i...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Corolla TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Corolla AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Corolla cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2009 Toyota Corolla LE 1.8 L4 GAS
If the TPMS (Tire Pressure Monitor System) warning system detects a drop in the tire inflation pressure while the vehicle is operated, the TPMS ECU (Electronic Control Unit) turns on the low tire pressure warning lamp in the instrument cluster to warn the driver. The...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Corolla TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Corolla AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Corolla cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS ECU -> TPMS Pressure Warning Valve & Transmitter -> TPMS Receiver -> TPMS Reset Switch
Vehicle: 2009 Toyota Corolla LE 1.8 L4 GAS
TPMS Pressure Warning Valve & Transmitter
If installing a replacement tire pressure warning valve and transmitter, note the identification number for use during registration. Refer to the Registration under the "Relearn Procedures."
Removal
- Loosen the wheel lug nuts.
- Raise and support vehicle with jack stands.
- Remove the wheel and tire assembly.
- Remove the tire valve stem cap, then the valve stem core and allow the tire to deflate, Fig. .
- Remove the nut retaining the tire pressure warning valve and transmitter to the wheel assembly, then drop the transmitter inside the tire.
- Using a...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Corolla TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Corolla AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Corolla cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2009 Toyota Corolla S 1.8 L4 GAS
Refer toF...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Corolla TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Toyota Corolla vehicle.
|
| Access the Complete guide! |
