Auto Parts Search
2009 Toyota Land Cruiser CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Toyota REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Toyota Land Cruiser AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS
- Remove front wheel and drive shaft locknut.
- Remove bolts, then the brake caliper and disc. Support brake caliper securely.
- Remove bolt and disconnect flexible hose from steering knuckle.
- Remove bolts, washers and brake cylinder.
- Support brake cylinder securely.
- Remove grease cap from flange.
- Remove snap ring using suitable tool.
- Remove ABS speed sensor and wire harness from steering knuckle.
- Remove bolts and disconnect steering knuckle arm. Upon installation clean threads of two bolts and steering knuckle with suitable cleaner. Apply approved sealant to threads of two bolts
- Discon...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Land Cruiser AUTOMOBILES
Description
Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS
A tire pressure sensor and transmitter assembly is installed in each tire and wheel assembly. The sensor measures the tire pressure. The measured tire pressure and transmitter identification are transmitted as radio waves to the TPMS (Tire Pressure Monitor System) warning antenna and receiver on the body. From the receiver the signal is sent to the TPMS ECU (Electronic Control Uni...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Toyota Land Cruiser AUTOMOBILES
Alternator, Replace
Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS
- Disconnect cable from battery ground terminal.
- Remove V-bank cover sub-assembly.
- Remove air cleaner hose assembly.
- Remove air cleaner assembly.
- Remove right and lefthand front fender splash shield sub-assembly.
- Remove engine under cover sub-assembly.
- Remove fan and alternator V belt.
- Remove righthand front fender apron seal front.
- Disconnect vane pump assembly.
- Disconnect oil cooler pipe assembly.
- Disconnect alternator connector.
- Remove ter...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Toyota Land Cruiser AUTOMOBILES
Cabin Air Filter Service -> Toyota -> 2008-09 Land Cruiser
Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS
The cabin air filter should be cleaned every 18 months or 15,000 miles and replaced every 36 months or 30,000 miles. The filter should be replaced more often if air flow is less than normal.
- Open th...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Toyota Land Cruiser AUTOMOBILES
Toyota -> Low Coolant Lamp ->
Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Land Cruiser AUTOMOBILES
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at water outlet.
- Remove hose from water outlet.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heat...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Toyota Land Cruiser AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS
- Remove bolts from lefthand and righthand fender splash shield subassemblys, then remove splash shields.
- Remove bolts from engine under cover subassembly, then remove cover subassembly.
- Remove V-bank cover subassembly.
- Rotate or lift be...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Toyota Land Cruiser AUTOMOBILES
OEM TSB listings for most 2009 Toyota Land Cruiser cars and light trucks sold in the U.S. from 1985+.
Document: XM SATELLITE RADIO INOPERATIVE UNTIL IGNITION KEY IS CYCLED Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS Symptoms: |
Document: Driveraˆ™s Door Key Cylinder Difficult to Operate Vehicle: 2009 Toyota Land Cruiser 5.7 V8 GAS Symptoms: |
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Toyota Land Cruiser AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Toyota Land Cruiser cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Toyota Land Cruiser cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Toyota Land Cruiser cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Toyota Land Cruiser cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Land Cruiser SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |