Auto Parts Search
2009 Toyota Sienna CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Toyota REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Toyota Sienna car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your Toyota Sienna automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Toyota Sienna AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2009 Toyota Sienna Limited 3.5 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- On models equipped with 4WD, drain transaxle oil in suitable container.
- On all models, unstake wheel hub nut using suitable tool but do not remove nut.
- Apply brakes and remove lefthand driveline nut.
- Remove nut and separate lefthand front stabilizer link assembly. If ball joint turns together with nut use 6mm tool to hold stud.
- Disconnect ABS wheel speed sensor and remove bolt securing lefthand flexible hose from shock absorber.
- Remove bolt and separate speed sen...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Sienna AUTOMOBILES
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2009 Toyota Sienna CE 3.5 V6 GAS
Refer to Fig. for wiring...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Toyota Sienna AUTOMOBILES
Alternator, Replace
Vehicle: 2009 Toyota Sienna CE 3.5 V6 GAS
- Remove V-bank cover sub-assembly.
- Remove righthand front wheel.
- Remove engine under cover.
- Remove righthand front fender apron seal.
- Drain engine coolant into a suitable container.
- Remove air cleaner inlet.
- Remove battery.
- Remove front bumper assembly.
- Remove front bumper energy absorber.
- Remove air cleaner inlet.
- Disconnect radiator reserve tank hose or pipe.
- Disconnect radiator hose.
- Disconnect radiator hose.
- Remove hood lock release lever protector.
- Remove hood lock assembly.
- Remove hood lock support sub-assembly.
- Disconnect cooling fan ECU connector.
- Remove radiator upper support sub-ass...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Toyota Sienna AUTOMOBILES
Cabin Air Filter Service -> Toyota -> 2007-09 Sienna
Vehicle: 2009 Toyota Sienna Limited 3.5 V6 GAS
The cabin air filter should be cleaned every 18 months or 15,000 miles and replaced every 36 months or 30,000 miles. The filter should be replaced more often if air flow is less than normal.
- Open the glove compartment door, then slide off the damper rod, Fig. .
- Push inward on each side of the glove compartment to disconnect the claws, Fig. .
- Remove the cabin air filter case f...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Toyota Sienna AUTOMOBILES
Toyota -> Tire Pressure Warning Lamp -> 2007-09 Sienna -> Registration -> Relearn -> Reset -> System Initialization -> Tire Pressure Sensor & Transmitter -> TPMS ECU
Vehicle: 2009 Toyota Sienna Limited 3.5 V6 GAS
Reset
This warning lamp will illuminate when tire pressure falls below a specified psi. When the warning lamp illuminates, check the air pressure of the tire and adjust it to specified pressure. When the vehicle is driven more than 18 mph after the adjustment, the lamp will go off.
Relearn
Registration
TPMS ECU
If replacing the TPMS ECU, prior to removal, use a suitably programmed scan tool to read the registered transmitter identification number for all wheels and note them for registration.
- Connect a suitably programmed scan tool to DLC3 located under the LH side of the instrument pa...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Sienna AUTOMOBILES
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2009 Toyota Sienna Limited 3.5 V6 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at water outlet.
- Remove hose from water outlet.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at ...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Toyota Sienna AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Toyota Sienna Limited 3.5 V6 GAS
- Raise and support vehicle.
- Remove right front wheel.
- Remove bolts from righthand fender apron seal, then remove apron seal.
- Rotate or lift belt tensioner arm counterclockwise, usi...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Toyota Sienna AUTOMOBILES
OEM TSB listings for most 2009 Toyota Sienna cars and light trucks sold in the U.S. from 1985+.
|
Document: XM SATELLITE RADIO INOPERATIVE UNTIL IGNITION KEY IS CYCLED Vehicle: 2009 Toyota Sienna CE 3.5 V6 GAS Symptoms: |
|
Document: BRAKE BOOSTER RATTLE/BUZZ NOISE Vehicle: 2009 Toyota Sienna CE 3.5 V6 GAS Symptoms: |
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Toyota Sienna AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Toyota Sienna cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Toyota Sienna cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Toyota Sienna cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Toyota Sienna cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Sienna SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Toyota Sienna vehicle.
|
| Access the Complete guide! |
