Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2010 Dodge Challenger car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2010 Dodge Challenger automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2010 Dodge Challenger
- 2010 Dodge Challenger SRT8 6.1 V8 GAS, CC:6059, CID:370, Fuel Injection, Aspiration:370, Engine VIN:, Desg:W
- 2010 Dodge Challenger SE 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:V
- 2010 Dodge Challenger R/T 5.7 V8 GAS, CID:345, Fuel Injection, Aspiration:345, Engine VIN:, Desg:T
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Dodge Challenger AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Dodge Challenger cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2010 Dodge Challenger R/T 5.7 V8 GAS
Lower
- Drain coolant into a suitable container.
- Loosen hose clamp connecting hose to radiator.
- Loosen hose clamp connecting hose to water pump.
- Remove hose from vehicle.
- Reverse procedure to i...
CLICK HERE TO GET FULL ACCESS TO 2010 Dodge Challenger RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Dodge Challenger AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Dodge Challenger cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2010 Dodge Challenger SE 3.5 V6 GAS
Lower
- Drain coolant into a suitable container.
- Loosen hose clamp connecting hose to radiator.
- Loosen hose clamp connecting hose to thermostat housing.
- Remove hose from vehicle.
- Reverse procedure to ...
CLICK HERE TO GET FULL ACCESS TO 2010 Dodge Challenger RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Dodge Challenger AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Dodge Challenger cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2010 Dodge Challenger SRT8 6.1 V8 GAS
- Disconnect battery ground cable.
- Drain cooling system into a suitable container.
- Remove upper radiator hose.
- Remove upper radiator closure panels.
- Remove radiator fan assembly.
- Raise vehicle.
- Remove lower splash shield.
- Remove lower radiator hose.
- Remove lower condenser mount bolts.
- Lower vehicle.
- Remove upper radiator hose. Bolts are installed wit...
CLICK HERE TO GET FULL ACCESS TO 2010 Dodge Challenger RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Dodge Challenger AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Dodge Challenger cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2010 Dodge Challenger SE 3.5 V6 GAS
Inlet
- Drain coolant into a suitable container.
- Loosen hose clamp connecting hose to heater core inlet tube.
- Loosen hose clamp connecting hose to engine.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2010 Dodge Challenger RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Dodge Challenger AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Dodge Challenger cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2010 Dodge Challenger SE 3.5 V6 GAS
- Disconnect battery ground cable.
- Drain cooling system into a suitable container.
- Remove upper radiator hose.
- Remove upper radiator closure panels.
- Remove radiator fan assembly.
- Raise vehicle.
- Remove lower splash shield.
- Remove lower radiator hose.
- Remove lower condenser mount bolts.
- Lower vehicle.
- Remove upper radiator mounting bracke...
CLICK HERE TO GET FULL ACCESS TO 2010 Dodge Challenger RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Dodge Challenger AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Dodge Challenger cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2010 Dodge Challenger SRT8 6.1 V8 GAS
Inlet
- Drain coolant into a suitable container.
- Loosen hose clamp connecting hose to heater core inlet tube.
- Loosen hose clamp connecting hose to heater hose supply tube.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2010 Dodge Challenger RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2010 Dodge Challenger vehicle.
|
| Access the Complete guide! |
