Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2010 Honda Insight car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2010 Honda Insight automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2010 Honda Insight
- 2010 Honda Insight LX 1.3 L4 ELECTRIC/GAS, CC:1339, Fuel Injection
- 2010 Honda Insight EX 1.3 L4 ELECTRIC/GAS, CC:1339, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Honda Insight AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Honda Insight cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2010 Honda Insight EX 1.3 L4 ELECTRIC/GAS
- Raise and support vehicle.
- Remove front wheel lug nuts .
- Pry up stake on spindle nut, then remove nut.
- Drain transmission fluid in a suitable container.
- Remove lock pin from lower ball joint then remove castle nut.
- Be careful not to damage the ball joint boot when installing the remover. Do not force or hammer on the lower arm, or pry between the lower arm and the knuckle. You could damage the ball joint.
- Pull knuckle outward, then separate outboard joint from front hub using a plas...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Insight DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Honda Insight AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Honda Insight cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2010 Honda Insight LX 1.3 L4 ELECTRIC/GAS
- Raise and support vehicle.
- Remove front wheel lug nuts .
- Pry up stake on spindle nut, then remove nut.
- Drain transmission fluid in a suitable container.
- Remove lock pin from lower ball joint then remove castle nut.
- Be careful not to damage the ball joint boot when installing the remover. Do not force or hammer on the lower arm, or pry between the lower arm and the knuckle. You could damage the ball joint.
- Pull knuckle outward, then separate outboard joint from front hub using a plas...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Insight DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



