Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2010 Honda Pilot car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2010 Honda Pilot automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2010 Honda Pilot
- 2010 Honda Pilot LX 3.5 V6 GAS, CC:3471, Fuel Injection
- 2010 Honda Pilot EX 3.5 V6 GAS, CC:3471, Fuel Injection
- 2010 Honda Pilot EX-L 3.5 V6 GAS, CC:3471, Fuel Injection
- 2010 Honda Pilot Touring 3.5 V6 GAS, CC:3471, Fuel Injection
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Honda Pilot AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Honda Pilot cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2010 Honda Pilot LX 3.5 V6 GAS
Inlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp with suitable tool.
- Remove hose from heater core tube.
- Reposition hose clamp with suitable tool.
- Remove hose from water tee.
- Reverse procedure to install.
Outlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp with su...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Pilot RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Honda Pilot AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Honda Pilot cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2010 Honda Pilot EX-L 3.5 V6 GAS
Inlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp with suitable tool.
- Remove hose from heater core tube.
- Reposition hose clamp with suitable tool.
- Remove hose from water tee.
- Reverse procedure to install.
Outlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp with su...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Pilot RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Honda Pilot AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Honda Pilot cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2010 Honda Pilot EX-L 3.5 V6 GAS
- Disconnect negative battery cable.
- Remove front grille.
- Raise vehicle on lift.
- Drain engine coolant into a suitable container.
- Remove harness clamp from radiator fan shroud.
- Unclamp ATF cooler hose clamps and loosen A/C condenser fan shroud mounting bolts.
- Lower vehicle.
- Disconnect radiator fan motor connector and radiator upper hose, then remove harness clamps.
- Disconnect A/C condenser fan motor connector and coolant reservoir hose, then remove harness clamps.
- Remove bulkhead bracket mounting bolt/nut and upper brackets/cushions, then disconnect coolant reservoir hose.
- Remove A/C conde...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Pilot RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Honda Pilot AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Honda Pilot cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2010 Honda Pilot LX 3.5 V6 GAS
- Disconnect negative battery cable.
- Remove front grille.
- Raise vehicle on lift.
- Drain engine coolant into a suitable container.
- Remove harness clamp from radiator fan shroud.
- Unclamp ATF cooler hose clamps and loosen A/C condenser fan shroud mounting bolts.
- Lower vehicle.
- Disconnect radiator fan motor connector and radiator upper hose, then remove harness clamps.
- Disconnect A/C condenser fan motor connector and coolant reservoir hose, then remove harness clamps.
- Remove bulkhead bracket mounting bolt/nut and upper brackets/cushions, then disconnect coolant reservoir hose.
- Remove A/C conde...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Pilot RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Honda Pilot AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Honda Pilot cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2010 Honda Pilot EX 3.5 V6 GAS
- Disconnect negative battery cable.
- Remove front grille.
- Raise vehicle on lift.
- Drain engine coolant into a suitable container.
- Remove harness clamp from radiator fan shroud.
- Unclamp ATF cooler hose clamps and loosen A/C condenser fan shroud mounting bolts.
- Lower vehicle.
- Disconnect radiator fan motor connector and radiator upper hose, then remove harness clamps.
- Disconnect A/C condenser fan motor connector and coolant reservoir hose, then remove harness clamps.
- Remove bulkhead bracket mounting bolt/nut and upper brackets/cushions, then disconnect coolant reservoir hose.
- Remove A/C conde...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Pilot RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Honda Pilot AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Honda Pilot cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2010 Honda Pilot EX 3.5 V6 GAS
Lower
- Drain engine coolant into a suitable container.
- Reposition hose clamp and remove hose from thermostat housing tube.
- Reposition hose clamp and remove hose from radiator outlet.
- Remove hose from vehicle.
- Reverse pro...
CLICK HERE TO GET FULL ACCESS TO 2010 Honda Pilot RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
