Auto Parts Search
Chevrolet Camaro CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Chevrolet REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Year
2010 | 2002 | 2001 | 2000 |
1999 | 1998 | 1997 | 1996 |
1995 | 1994 | 1993 | 1992 |
1991 | 1990 | 1989 | 1988 |
1987 | 1986 | 1985 | 1984 |
1983 | 1982 | 1981 | 1980 |
1979 | 1978 | 1977 | 1976 |
1975 | 1974 | 1973 | 1972 |
1971 | 1970 | 1969 | 1968 |
1967 |

A/C & HEATER SERVICE PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported Chevrolet Camaro cars and light trucks from 1990+
Component Replacement & Adjustment -> Camaro & Firebird -> Control Assembly, Replace
Vehicle: 2000 Chevrolet Camaro 3.8 V6 GAS
- Remove radio/control assembly trim plate.
- Remove control assembly attaching screws, then slowly p...
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported Chevrolet Camaro cars and light trucks from 1990+.
Power Brake Units -> Application Chart
Vehicle: 2002 Chevrolet Camaro SS 5.7 V8 GAS
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Fuel filter replacement procedures with corresponding images for most domestic and imported Chevrolet Camaro cars and light trucks sold in the U.S. for 1980+.
General Motors Corp./Saturn Passenger Cars -> Fuel Filter Replacement -> Except Aveo, Chevette 1.8L Diesel, Corvette, GTO, LaCrosse, Malibu (2004-06) & Malibu Maxx, Vibe, XLR, 2004-05 Corvette & 1998-2002 Metro & Prizm
Vehicle: 1993 Chevrolet Camaro Z28 5.7 V8 GAS
Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.
Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.
After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven while the v...
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported Chevrolet Camaro cars and light trucks from 1990+.
DRIVESHAFT, Replace -> One piece -> Two piece
Vehicle: 1999 Chevrolet Camaro SS 5.7 V8 GAS
One piece
- Raise and suitably support vehicle.
- Mark relationship of propeller shaft to pinion gear yoke.
- Remove propeller shaft bolts/screws.
- Remove propeller shaft retainers. Support propeller shaft during removal.
- Withdraw slip yoke from transmission.
- Move propeller shaft rearward and pass propeller shaft under rear axle housing. If bearing caps are loose, tape bearing caps together in order to prevent dropping and losing needle roller bearings.
- Reverse procedure to install, noting following:
- Torque propeller shaft bolt/screw to 16 ft. lbs.
- Torque propeller shaft-to-center support b...
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported Chevrolet Camaro cars and light trucks from 1990+.
Starter, Replace -> Installation -> Removal
Vehicle: 2001 Chevrolet Camaro 3.8 V6 GAS
This vehicle was designed for starter mounting without shims. If single or double shims have been added to correct a noise or engagement problem, they should be reinstalled in their original positions to ensure proper pinion to flywheel assembly engagement.
Removal
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove starter shield.
- Remove starter motor attaching bolts and lower starter motor assembly.
- Disconnect electrical connectors from starter motor assembly, then remove sta...
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported Chevrolet Camaro cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Gauge Warning Lamp ->
Vehicle: 1991 Chevrolet Camaro RS 5.0 V8 GAS
The Check Gauge warning lamp will light to warn the driver to inspect the oil pressure gauge, engine coolant temperature ga...
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported Chevrolet Camaro cars and light trucks from 1990+
Radiator, Replace
Vehicle: 1991 Chevrolet Camaro RS 3.1 V6 GAS
- Disconnect battery ground cable.
- Drain engine cooling system into a suitable container.
- Remove air cleaner assembly.
- Remove intake duct.
- Remove mass air flow (MAF) sensor, if equipped.
- Remove coolant recovery hose.
- Remove heater hose and clamp.
- Remove electric cooling fan mounting bolts.
- Remove electric cooling fans.
- Remove upper radiator hose clamp.
- Disconnect upper radiator hose from radiator.
- Remove lower radiator hose clamp.
- Disconnect lower radia...
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR Chevrolet Camaro AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported Chevrolet Camaro cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Accessory -> Air Conditioning
Vehicle: 2010 Chevrolet Camaro SS 6.2 V8 GAS
Accessory
- Raise and support the vehicle.
- Release drive belt tension with a suitable tool.
- Remove drive belt from pulleys and tensioner.
- Clean and inspect drive belt surfaces of all pulleys.
- Reverse procedure to install.
Air Conditioning
- Remove accessory drive belt.
- Using a suitable tool cut drive belt from air conditioning and crankshaft pulleys.
- Position belt behind rear face of the balancer and off of the air conditioning pulley.
- Install a suitable tool on balancer.
- Slide belt installation tool upward, installing belt onto the belt installation tool.
- Loosen camshaft positi...
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR Chevrolet Camaro AUTOMOBILES
Component location diagrams for most Chevrolet Camaro cars and light trucks sold in the U.S. from 1990+.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR Chevrolet Camaro AUTOMOBILES
OEM drawn wiring diagrams for most Chevrolet Camaro cars and light trucks sold in the U.S.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR Chevrolet Camaro AUTOMOBILES
OEM TSB listings for most Chevrolet Camaro cars and light trucks sold in the U.S. from 1985+.
Document: PRODUCT QUALITY CENTER (PQC) FOR ENGINE, TRANSMISSION ASSEMBLY AND TRANSFER CASE REPLACEMENT - REVISED Vehicle: 1999 Chevrolet Camaro SS 5.7 V8 GAS Auto Systems: |
Document: LABOR TIME GUIDE UPDATES Vehicle: 1989 Chevrolet Camaro 5.0 V8 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR Chevrolet Camaro AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most Chevrolet Camaro cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most Chevrolet Camaro cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most Chevrolet Camaro cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most Chevrolet Camaro cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO Chevrolet Camaro SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |