Auto Parts Search
Nissan Rogue CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Nissan REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Year
| 2010 | 2009 | 2008 |
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about Nissan Rogue car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your Nissan Rogue automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR Nissan Rogue AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported Nissan Rogue cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Nissan Rogue S 2.5 L4 GAS
Circular clips should be properly meshed with differential side gear (transaxle side). Inspect that clips are properly seated after installation and that driveshaft will not come out. Always use a new circular clip for installation. To prevent damage to CV boots use suitable cloth over boots to prevent damage to boots during removal and installation.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire. Before removing front axle assembly disconnect ABS wheel sensor from assembly. Move sensor away from front axle ...
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR Nissan Rogue AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported Nissan Rogue cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Interpretation -> Less Scan Tool -> With Scan Tool
Vehicle: 2009 Nissan Rogue SL 2.5 L4 GAS
Less Scan Tool
Accessing Diagnostic Trouble Codes
To start the self-diagnostics, place the ignition switch in the On position, then ground terminal of the tire pressure warning check connector. The fault location is indicated by the blinking of the low tire pressure warning lamp, Fig. . If the low tire pressure warning lamp is blinking repeatedly at 5 Hz, there is no fault occurring in the system.
Diagnostic Trouble Code Interpretation
[[table data]]Clearing Diagnostic Trouble Codes
In order to make it easier to find the cause of hard to duplicate malfunctions, the malfunction information is s...
[[table data]]CLICK HERE TO GET FULL ACCESS TO Nissan Rogue TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR Nissan Rogue AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported Nissan Rogue cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Nissan Rogue SL 2.5 L4 GAS
- Disconnect battery ground terminal.
- Remove drive belt.
- Disconnect alternator connector.
- Remove B+ terminal nut and B+ terminal harness.
- Remove harness bracket.
- Remove upper alternator mounting bolt.
- Remove lower alternator mounti...
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR Nissan Rogue AUTOMOBILES
Cabin air filter locations and replacement procedures with corresponding images for most domestic and imported Nissan Rogue cars and light trucks sold in the U.S. as equipped to the current model year.
Cabin Air Filter Service -> Nissan -> 2008-09 Rouge
Vehicle: 2009 Nissan Rogue SL 2.5 L4 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 12,000 miles. In dusty areas change the cabin air filter more often.
- Remove instrument driver's side lower cover mounting screw, Fig. .
- Pull back instrument driver's side lower cover.
- Detach the DLC (Data Link Connector) from the driver's side lower cover.
- Detach the hood release cable from the driver's side lower cover.
- Detach the harness clip and remove the driver's side lower cover.
- Disconnect accelerator pedal position sensor electrical connector, Fig. .
- Remove the accelerator pedal retaining...
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR Nissan Rogue AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported Nissan Rogue cars and light trucks sold in the U.S. from 1990+.
Nissan -> Check Engine Lamp ->
Vehicle: 2009 Nissan Rogue SL 2.5 L4 GAS
The Check Engine lamp will light when the ignition is on with engine not running. When the engine is started, then lamp should go out. If it does not, a diagnostic trouble code has been stor...
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR Nissan Rogue AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported Nissan Rogue cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2009 Nissan Rogue S 2.5 L4 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet.
- Remove hose from water inlet.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR Nissan Rogue AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported Nissan Rogue cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 2008 Nissan Rogue S 2.5 L4 GAS
- Remove right front wheel.
- Remove bolts from righthand front fender protector assembly, then remove fender protector.
- Rotate or lift belt tensioner arm clockwise, using a suitable tool to relieve tension from drive belt. Do not rotate belt tensioner ...
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR Nissan Rogue AUTOMOBILES
Component location diagrams for most Nissan Rogue cars and light trucks sold in the U.S. from 1990+.
 Body Components Diagram for 2008 Nissan Rogue SL 2.5 L4 GASComponents on diagram: |
 Body Components Diagram for 2008 Nissan Rogue S 2.5 L4 GASComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR Nissan Rogue AUTOMOBILES
OEM drawn wiring diagrams for most Nissan Rogue cars and light trucks sold in the U.S.
 2008 Nissan Rogue SL 2.5 L4 GAS Wiring DiagramComponents on diagram: |
 2008 Nissan Rogue S 2.5 L4 GAS Wiring DiagramComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR Nissan Rogue AUTOMOBILES
OEM TSB listings for most Nissan Rogue cars and light trucks sold in the U.S. from 1985+.
|
Document: RECALL - PASSENGER AIR BAG OCCUPANT CLASSIFICATION SYSTEM (OCS) - REVISED Vehicle: 2008 Nissan Rogue S 2.5 L4 GAS Auto Systems: |
|
Document: POWER WINDOW AUTO UP INITIALIZATION Vehicle: 2008 Nissan Rogue SL 2.5 L4 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR Nissan Rogue AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most Nissan Rogue cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most Nissan Rogue cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most Nissan Rogue cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most Nissan Rogue cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO Nissan Rogue SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your Nissan Rogue vehicle.
|
| Access the Complete guide! |
