Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Acura Integra car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1990 Acura Integra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1990 Acura Integra
- 1990 Acura Integra LS 1.8 L4 GAS, CC:1834, Fuel Injection
- 1990 Acura Integra RS 1.8 L4 GAS, CC:1834, Fuel Injection
- 1990 Acura Integra GS 1.8 L4 GAS, CC:1834, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1990 Acura Integra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Acura Integra cars and light trucks from 1990+.
ACURA, POWER BRAKE UNITS -> BRAKE BOOSTER
Vehicle: 1990 Acura Integra GS 1.8 L4 GAS
On Models Equipped With Anti-Lock Brakes, Refer To "Anti-Lo... "
CLICK HERE TO GET FULL ACCESS TO 1990 Acura Integra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Acura Integra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Acura Integra cars and light trucks from 1990+.
ACURA, DISC BRAKES -> CALIPER SERVICE -> 1991-92 Legend -> Assembly & Installation -> FRONT -> Integra, Vigor & 1990 Legend -> REAR -> Removal & Disassembly
Vehicle: 1990 Acura Integra GS 1.8 L4 GAS
FRONT
Removal & Disassembly
- Raise and support front of vehicle and remove wheels.
- Remove banjo bolt and disconnect brake line from caliper. Secure hose in raised position to prevent leakage.
- Remove caliper pin bolt and the caliper, Figs. through .
- On Legend & Vigor models, remove pad spring from caliper.
- On all models, position a block of wood or shop rag in caliper opposite piston, then carefully remove piston by applying compressed air into fluid inlet port. Use only as much air pressure as is needed to remove piston.
- Remove piston boot and seal.
Assembly & Installation
- Clean caliper ...
CLICK HERE TO GET FULL ACCESS TO 1990 Acura Integra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Acura Integra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Acura Integra cars and light trucks from 1990+.
ACURA, ANTI-LOCK BRAKE SYSTEM -> TROUBLESHOOTING -> ALB CHECKER -> DIAGNOSTIC TESTS -> Function Test -> Temporary Driving Conditions -> Trouble Code 2 -> WARNING LAMP -> Warning Lamp Circuit -> WHEEL SENSOR SIGNAL CONFIRMATION
Vehicle: 1990 Acura Integra LS 1.8 L4 GAS
Refer to Figs. through , for component location.
ALB CHECKER
Never drive vehicle while ALB checker is operating. A collision may result from a reduction or complete loss of braking ability.
The checker should be used through modes 0-6 on all models except 1991-92 Legend and 1992 Vigor, and modes 0-5 for 1991-92 Legend and 1992 Vigor, to confirm proper system operation under any of the following conditions:
- After replacing or bleeding system fluid, 0 mode is not required.
- After replacing any ALB system component.
- After any body or suspension repair that may cause malfunctions wi...
CLICK HERE TO GET FULL ACCESS TO 1990 Acura Integra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Acura Integra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Acura Integra cars and light trucks from 1990+.
ACURA, DISC BRAKES -> ADJUSTMENTS -> BRAKE PEDAL HEIGHT -> PARKING BRAKE
Vehicle: 1990 Acura Integra GS 1.8 L4 GAS
BRAKE PEDAL HEIGHT
- Loosen brake light switch locknut, then back off switch until it breaks contact with brake pedal.
- Loosen pushrod locknut, then turn pushrod in or out as necessary until pedal height measures as follows:
- 6.10 inches (manual transaxle) 6.3 inches (automatic transaxle) on 1990-92 Integra models.
- 6.7 inches on 1990 Legend models, 8.4 inches on 1991-92 Legend models.
- 7.83 inches (manual transaxle) 7.64 inches (automatic transaxle) on 1992 Vigor models.
- Turn in brake light switch until plunger is full depressed, then back switch off1/2 turn and tighten locknut.
- With engine sto...
CLICK HERE TO GET FULL ACCESS TO 1990 Acura Integra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Acura Integra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Acura Integra cars and light trucks from 1990+.
ACURA, HYDRAULIC BRAKE SYSTEMS -> ADJUSTMENTS -> BRAKE BOOSTER PUSHROD-TO-PRIMARY PISTON CLEARANCE
Vehicle: 1990 Acura Integra GS 1.8 L4 GAS
On Models Equipped With Anti-Lock Brakes, Refer To "Anti-Lock Brakes System."
BRAKE BOOSTER PUSHROD-TO-PRIMARY PISTON CLEARANCE
- Remove master cylinder, as outlined under "Master Cylinder, Replace."
- Using pushrod adjustment gauge tool No. 07JAG-SD40100 or equivalent, adjust bolt so top is flush with master cylinder piston.
- Install pushrod adjustment gauge tool upside down on booster, Fig. .
- Install master cyli...
CLICK HERE TO GET FULL ACCESS TO 1990 Acura Integra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Acura Integra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Acura Integra cars and light trucks from 1990+.
ACURA, ANTI-LOCK BRAKE SYSTEM -> COMPONENT TESTING -> 1991-92 Legend & 1992 Vigor -> Except 1991-92 Legend & 1992 Vigor -> FAILSAFE RELAY MOTOR -> SOLENOID LEAK TEST
Vehicle: 1990 Acura Integra LS 1.8 L4 GAS
FAILSAFE RELAY MOTOR
Except 1991-92 Legend & 1992 Vigor
- Check for continuity between relay terminals 3 and 4, Fig. . Continuity should not be indicated.
- Connect 12 volt battery across terminals 1 and 2. Continuity should be indicated between terminals 3 and 4. Replace relay as needed.
1991-92 Legend & 1992 Vigor
- Remove fail-safe relay, then check for continuity between relay terminals A and B, Fig. . Continuity should not be indicated.
- Connect 12 volt battery across terminals C and D. Continuity should be indicated between terminals A and B. Replace relay as needed.
- Remove motor rela...
CLICK HERE TO GET FULL ACCESS TO 1990 Acura Integra BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1990 Acura Integra vehicle.
|
| Access the Complete guide! |
