1990 Dodge B250 VAN Maintenance Lamp Reset (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Dodge B250 VAN car and truck repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1990 Dodge B250 VAN automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1990 Dodge B250 VAN

  • 1990 Dodge B250 VAN 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
  • 1990 Dodge B250 VAN 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
  • 1990 Dodge B250 VAN 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
  • 1990 Dodge B250 VAN Sportsman 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
  • 1990 Dodge B250 VAN Sportsman 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
  • 1990 Dodge B250 VAN Sportsman 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z

MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Dodge B250 VAN AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Dodge B250 VAN cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Trucks -> Transmission Temperature Indicator Lamp -> Dodge
Vehicle: 1990 Dodge B250 VAN 3.9 V6 GAS

If this lamp is lit while operating the vehicle, operate engine at idle speed or fast idle with transmissio...

CLICK HERE TO GET FULL ACCESS TO 1990 Dodge B250 VAN MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Dodge B250 VAN AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Dodge B250 VAN cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Trucks -> Traction Control System Warning Lamp ->
Vehicle: 1990 Dodge B250 VAN 5.2 V8 GAS

This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...

CLICK HERE TO GET FULL ACCESS TO 1990 Dodge B250 VAN MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Dodge B250 VAN AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Dodge B250 VAN cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Trucks -> Check Engine Lamp -> Chrysler, Dodge, Jeep & Plymouth Except Ram 50
Vehicle: 1990 Dodge B250 VAN 5.9 V8 GAS

On models less OBD II, the Check Engine lamp should light for approximately 3 seconds after the ignition has been turned On as a bulb inspection. If improper or no signals are received by the Powertrain Control Module (PCM) from various sensors and monitored systems or if the PCM enters its Limp-In mode, the PCM will light the Check Engine lamp. On Chrysler, Dodge and Plymouth models, After diagnosing and servicing the vehicle, the PCM memory will be cleared after approximately 40 to 100 ignition key On-Off cycles or by using a suitable scan tool. ...

CLICK HERE TO GET FULL ACCESS TO 1990 Dodge B250 VAN MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Dodge B250 VAN AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Dodge B250 VAN cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Trucks -> Air Bag Indicator Lamp ->
Vehicle: 1990 Dodge B250 VAN 5.9 V8 GAS

The air bag indicator lamp lights for 6-8 seconds each time the ignition is turned On. The lamp indicates a system self-test is being performed by the air bag co...

CLICK HERE TO GET FULL ACCESS TO 1990 Dodge B250 VAN MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Dodge B250 VAN AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Dodge B250 VAN cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Trucks -> Check Gauge Warning Lamp ->
Vehicle: 1990 Dodge B250 VAN 3.9 V6 GAS

When the ignition is turned On, the lamp will light for approximately 2 seconds as a bulb inspection. The PCM continually monitors the engine oil pressure, engine coolant temperature and electrical system voltage. The check gauges lamp w...

CLICK HERE TO GET FULL ACCESS TO 1990 Dodge B250 VAN MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1990 Dodge B250 VAN AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 1990 Dodge B250 VAN cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Trucks -> Emission Maintenance Reminder Indicator -> Chrysler, Dodge & Plymouth
Vehicle: 1990 Dodge B250 VAN 3.9 V6 GAS

This Emission Maintenance Reminder System (Maintenance Required Lamp) is incorporated into the engine controller. The controller stores vehicle mileage into its memory every eight miles, then at 60,000, 82,500 or 120,000 miles it will light the EMR (Maintenance Required) lamp. When the indicated mileage is reached or the EMR lamp is on at all times, the following components must be replaced and the EMR lamp reset:

  • At 60,00 miles, proceed as follows:
    • Replace EGR valve.
    • Clean EGR passage.
    • Replace PCV valve.
  • At 82,500 miles, replace oxygen sensor.
  • At 120,000 miles, proceed as ...

CLICK HERE TO GET FULL ACCESS TO 1990 Dodge B250 VAN MAINTENANCE LAMP RESET PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Dodge B250 VAN vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find