Auto Parts Search
We have info for following modifications of 1991 Chevrolet Corvette
- 1991 Chevrolet Corvette 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:8
- 1991 Chevrolet Corvette ZR-1 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:J
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Chevrolet Corvette AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Chevrolet Corvette cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Axle Shaft -> Propeller Shaft
Vehicle: 1991 Chevrolet Corvette 5.7 V8 GAS
Propeller Shaft
- With transmission in neutral and parking brake released, raise and support vehicle, then remove underbody braces, as required.
- Remove exhaust system as follows:
- Disconnect AIR pipe from catalytic converter and exhaust pipe.
- Disconnect electrical connector to oxygen sensor.
- Remove bolts securing muffler to hangers, disconnect exhaust pipes from manifolds and remove exhaust system as an assembly.
- Support transmission, remove support beam retaining bolts and support beam.
- Mark position of shaft in relation to pinion flange for installation.
- Remove straps securing univer...
CLICK HERE TO GET FULL ACCESS TO 1991 Chevrolet Corvette DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Chevrolet Corvette AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Chevrolet Corvette cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Axle Shaft -> Propeller Shaft
Vehicle: 1991 Chevrolet Corvette ZR-1 5.7 V8 GAS
Propeller Shaft
- With transmission in neutral and parking brake released, raise and support vehicle, then remove underbody braces, as required.
- Remove exhaust system as follows:
- Disconnect AIR pipe from catalytic converter and exhaust pipe.
- Disconnect electrical connector to oxygen sensor.
- Remove bolts securing muffler to hangers, disconnect exhaust pipes from manifolds and remove exhaust system as an assembly.
- Support transmission, remove support beam retaining bolts and support beam.
- Mark position of shaft in relation to pinion flange for installation.
- Remove straps securing univer...
CLICK HERE TO GET FULL ACCESS TO 1991 Chevrolet Corvette DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1991 Chevrolet Corvette vehicle. |
Access the Complete guide! |