Auto Parts Search

We have info for following modifications of 1991 Dodge B250 VAN
- 1991 Dodge B250 VAN 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
- 1991 Dodge B250 VAN 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1991 Dodge B250 VAN 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
- 1991 Dodge B250 VAN Sportsman 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
- 1991 Dodge B250 VAN Sportsman 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1991 Dodge B250 VAN Sportsman 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
BRAKE SERVICE PROCEDURES FOR 1991 Dodge B250 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge B250 VAN cars and light trucks from 1990+.
ANTI-LOCK BRAKE SYSTEM, CHRYSLER CORP. -> 1990-91 Chrysler Front Wheel Drive Models -> DESCRIPTION
Vehicle: 1991 Dodge B250 VAN Sportsman 5.9 V8 GAS
The Anti-Lock Braking System (ABS) prevents the wheels from locking up when braking, regardless of the surface conditions. This allows the car to stop in a shorter distance, and allows the driver to maintain directional control of the vehicle during heavy braking.
During normal braking conditions, the ABS operates like a co...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge B250 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge B250 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge B250 VAN cars and light trucks from 1990+.
DRUM BRAKES, CHRYSLER CORP. -> Drum Brakes, Chrylser -> FRONT WHEEL DRIVE MODELS -> Inspection -> Installation -> Removal
Vehicle: 1991 Dodge B250 VAN Sportsman 5.2 V8 GAS
Removal
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove brake drum. If brake lining is dragging on brake drum, back off brake adjustment by rotating adjustment screw.
- Using suitable pliers, remove adjuster lever spring, Fig. .
- Remove adjuster lever.
- Turn automatic adjuster screw out to expand shoes past wheel cylinder boot.
- Using suitable tool, remove hold-down springs.
- Pull brake shoe assembly down and away from anchor plate.
- Remove "C" clip retaining parking brake lever to trailing brake shoe webbing.
- Disassemble shoe assembly.
- Clean dirt from brake...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge B250 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge B250 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge B250 VAN cars and light trucks from 1990+.
DRUM BRAKES, CHRYSLER CORP. -> Drum Brakes, Chrylser -> SERVICE BRAKE, Adjust -> Adjustment -> FRONT WHEEL DRIVE MODELS -> RAM 50 & RAIDER -> REAR WHEEL DRIVE MODELS EXCEPT RAM RAIDER & RAM 50 -> Self-Adjusting Brakes
Vehicle: 1991 Dodge B250 VAN Sportsman 5.9 V8 GAS
FRONT WHEEL DRIVE MODELS
The rear brakes are self-adjusting. An initial adjustment is necessary after the brake shoes have been relined or replaced, or when the length of the star wheel adjuster has been changed during other service operations. To adjust the rear brakes, proceed as follows:
- Raise and support vehicle.
- Remove adjusting hole covers from brake supports.
- Release parking brake and back off adjustment to slacken cable.
- Insert adjusting tool C-3784 or equivalent into star wheel of adjusting screw. Move handle of tool upward until a slight drag is felt.
- Insert a suitable...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge B250 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge B250 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge B250 VAN cars and light trucks from 1990+.
ANTI-LOCK BRAKE SYSTEM, CHRYSLER CORP. -> 1990-91 Chrysler Rear Wheel Drive Models -> SYSTEM SERVICE -> ANTI-LOCK MODULE, REPLACE -> Dakota -> Full Size Pickups & Ramcharger -> Full Size Vans & Wagons -> HYDRAULIC VALVE, REPLACE -> SPEED SENSOR AIR GAP CHECK -> SPEED SENSOR, REPLACE
Vehicle: 1991 Dodge B250 VAN Sportsman 5.9 V8 GAS
HYDRAULIC VALVE, REPLACE
- Disconnect battery ground cable.
- Raise and support vehicle.
- Disconnect electrical connectors from valve, Figs. and .
- Disconnect brake lines from hydraulic valve.
- Remove hydraulic valve attaching screws and the valve.
- Reverse procedure to install, noting the following:
- Torque valve attaching screws to 16-25 ft. lbs.
- Bleed brake system as described under "Bleeding Brakes" in "Hydraulic Brake" section.
SPEED SENSOR AIR GAP CHECK
- Remove speed sensor from differential.
- Measure distance (dimension B) between end of sensor pole piece and bottom of sensor flange, Fig. . Dista...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge B250 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge B250 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge B250 VAN cars and light trucks from 1990+.
DRUM BRAKES, CHRYSLER CORP. -> Drum Brakes, Chrylser -> SERVICE BRAKE, Adjust -> Adjustment -> FRONT WHEEL DRIVE MODELS -> RAM 50 & RAIDER -> REAR WHEEL DRIVE MODELS EXCEPT RAM RAIDER & RAM 50 -> Self-Adjusting Brakes
Vehicle: 1991 Dodge B250 VAN 3.9 V6 GAS
FRONT WHEEL DRIVE MODELS
The rear brakes are self-adjusting. An initial adjustment is necessary after the brake shoes have been relined or replaced, or when the length of the star wheel adjuster has been changed during other service operations. To adjust the rear brakes, proceed as follows:
- Raise and support vehicle.
- Remove adjusting hole covers from brake supports.
- Release parking brake and back off adjustment to slacken cable.
- Insert adjusting tool C-3784 or equivalent into star wheel of adjusting screw. Move handle of tool upward until a slight drag is felt.
- Insert a suitable...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge B250 VAN BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge B250 VAN AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge B250 VAN cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS, CHRYSLER CORP. -> BLEEDING SYSTEM -> CHRYSLER -> Except Front Wheel Drive Models -> Front Wheel Drive Models -> JEEP
Vehicle: 1991 Dodge B250 VAN 3.9 V6 GAS
CHRYSLER
Except Front Wheel Drive Models
- On models equipped with Rear Wheel Anti-Lock brakes (RWAL), connect one end of a suitable hose to bleeder valve on RWAL hydraulic valve and submerge other end in a glass container partially filled with clean brake fluid.
- Pump brake pedal several times, then hold pedal down firmly.
- With pedal firmly depressed, open bleeder valve until pedal fades to floor, then close bleeder valve.
- Repeat procedure until a continuous flow of brake fluid is released from bleeder valve. Ensure a fluid level is maintained in master cylinder at all times.
- On all mod...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge B250 VAN BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |