1991 Ford F-150 Pickup Driveline, U-Joint & CV Axles Replacement (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Ford F-150 Pickup car and truck repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1991 Ford F-150 Pickup automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1991 Ford F-150 Pickup

  • 1991 Ford F-150 Pickup 5.0 V8 GAS, CID:302, Fuel Injection, Aspiration:302, Engine VIN:, Desg:N
  • 1991 Ford F-150 Pickup 4.9 L6 GAS, CID:300, Fuel Injection, Aspiration:300, Engine VIN:, Desg:Y
  • 1991 Ford F-150 Pickup 5.8 V8 GAS, CID:351, Fuel Injection, Aspiration:351, Engine VIN:, Desg:H
  • 1991 Ford F-150 Pickup Super CAB 5.0 V8 GAS, CID:302, Fuel Injection, Aspiration:302, Engine VIN:, Desg:N
  • 1991 Ford F-150 Pickup Super CAB 4.9 L6 GAS, CID:300, Fuel Injection, Aspiration:300, Engine VIN:, Desg:Y
  • 1991 Ford F-150 Pickup Super CAB 5.8 V8 GAS, CID:351, Fuel Injection, Aspiration:351, Engine VIN:, Desg:H

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Ford F-150 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Ford F-150 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1991 Ford F-150 Pickup 4.9 L6 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1991 Ford F-150 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Ford F-150 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Ford F-150 Pickup cars and light trucks from 1990+.

CV AXLE SHAFT, Replace -> Front
Vehicle: 1991 Ford F-150 Pickup 5.8 V8 GAS

Front

Warning: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the righthand kick panel area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.

  • With vehicle in NEUTRAL, position on a hoist.
  • Remove the front wheel and tire assembly.
  • Remove dust cap and nut from axle halfsha...

CLICK HERE TO GET FULL ACCESS TO 1991 Ford F-150 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Ford F-150 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Ford F-150 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1991 Ford F-150 Pickup 5.8 V8 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1991 Ford F-150 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Ford F-150 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Ford F-150 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1991 Ford F-150 Pickup Super CAB 5.8 V8 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1991 Ford F-150 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Ford F-150 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Ford F-150 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1991 Ford F-150 Pickup Super CAB 4.9 L6 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1991 Ford F-150 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Ford F-150 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Ford F-150 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 1991 Ford F-150 Pickup 5.8 V8 GAS

Front

  • Raise and support the vehicle.
  • Index-mark front driveshaft to front axle flange and at transfer case flange.
  • Remove and discard bolts and U-joint retainers.
  • Remove and discard four flange bolts.
  • Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
  • Reverse procedure to install, noting the following:
    • Torque flange bolts to 30 ft. lbs.
    • Torque U-joint retainer bolts to 16 ft. lbs.

Rear

One Piece Driveshaft
  • Raise and support vehicle.
  • To maint...

CLICK HERE TO GET FULL ACCESS TO 1991 Ford F-150 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1991 Ford F-150 Pickup vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find