Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Ford Probe car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Ford Probe automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Ford Probe
- 1991 Ford Probe GL 2.2 L4 GAS, CID:133, Fuel Injection, Aspiration:133, Engine VIN:, Desg:C
- 1991 Ford Probe GT 2.2 L4 GAS, CID:133, Fuel Injection, Aspiration:133, Engine VIN:, Desg:L
- 1991 Ford Probe LX 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Ford Probe cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1991 Ford Probe LX 3.0 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove solenoid B+ terminal nut.
- Disconnect battery lead and S terminal electrical connector.
- Remove starter motor ...
CLICK HERE TO GET FULL ACCESS TO 1991 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1991 Ford Probe LX 3.0 V6 GAS
- Disconnect battery ground cable.
- Remove accessory drive belt.
- Remove and set aside windshield washer reservoir.
- Remove power steering pump reservoir return hose from pump assembly.
- Remove power steering pump high pressure hose from pump assembly.
- Remove upper accessory support bracket mounting bolt.
- Remove middle accessory support bracket mounting bolt.
- Remove lower accessory support bracket mounting bolt.
- Remove attaching bolt from side of accessory support bracket at air cond...
CLICK HERE TO GET FULL ACCESS TO 1991 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1991 Ford Probe GL 2.2 L4 GAS
- Disconnect battery ground cable,
- Remove catalytic converter.
- Disconnect wiring terminal from back of alternator. Stator and field wiring terminals are push on type.
- After depressing lock tab, push on type terminal should be pulled straight off to prevent damages.
- Loosen alternator adjustment bolt, then through bolt enough to allow alternator to pivot.
- Re...
CLICK HERE TO GET FULL ACCESS TO 1991 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Ford Probe cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1991 Ford Probe GT 2.2 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- On models equipped with manual transaxle, remove exhaust pipe bracket.
- On all models, remove transaxle to engine bracket.
- Remove intake manifold to engine bracket.
- Remove solenoid B+ terminal nut, then disconnect battery lead and S terminal electrical connector.
- Remove starter motor mounting bolts
- Remove starter motor from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 1991 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1991 Ford Probe GT 2.2 L4 GAS
- Disconnect battery ground cable,
- Remove catalytic converter.
- Disconnect wiring terminal from back of alternator. Stator and field wiring terminals are push on type.
- After depressing lock tab, push on type terminal should be pulled straight off to prevent damages.
- Loosen alternator adjustment bolt, then through bolt enough to allow alternator to pivot.
- Re...
CLICK HERE TO GET FULL ACCESS TO 1991 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1991 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1991 Ford Probe cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1991 Ford Probe GL 2.2 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- On models equipped with manual transaxle, remove exhaust pipe bracket.
- On all models, remove transaxle to engine bracket.
- Remove intake manifold to engine bracket.
- Remove solenoid B+ terminal nut, then disconnect battery lead and S terminal electrical connector.
- Remove starter motor mounting bolts
- Remove starter motor from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 1991 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Ford Probe vehicle.
|
| Access the Complete guide! |
