Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Suzuki Samurai car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Suzuki Samurai automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Suzuki Samurai
- 1991 Suzuki Samurai JA 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:3
- 1991 Suzuki Samurai JL 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:3
- 1991 Suzuki Samurai JS 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:3
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Suzuki Samurai AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Suzuki Samurai cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Suzuki Samurai JA 1.3 L4 GAS
- Loosen wheel lug nuts, then raise and support vehicle. Position jack stands under axle housing.
- Remove lug nuts, then wheel assembly.
- Remove caliper carrier bolts, then support caliper with wire.
- Remove brake disc. If brake disc cannot be removed by hand, install two 8 mm bolts in holes provided, then tighten to remove disc.
- On models with free wheeling hubs, proceed as follows:
- Remove free wheeling hub cover attaching screws, then cover.
- Using needlenose pliers, remove free wheeling hub circlip, then free wheeling hub body.
- On models less free wheeling hub, proceed as follows:
- R...
CLICK HERE TO GET FULL ACCESS TO 1991 Suzuki Samurai DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Suzuki Samurai AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Suzuki Samurai cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Suzuki Samurai JL 1.3 L4 GAS
- Loosen wheel lug nuts, then raise and support vehicle. Position jack stands under axle housing.
- Remove lug nuts, then wheel assembly.
- Remove caliper carrier bolts, then support caliper with wire.
- Remove brake disc. If brake disc cannot be removed by hand, install two 8 mm bolts in holes provided, then tighten to remove disc.
- On models with free wheeling hubs, proceed as follows:
- Remove free wheeling hub cover attaching screws, then cover.
- Using needlenose pliers, remove free wheeling hub circlip, then free wheeling hub body.
- On models less free wheeling hub, proceed as follows:
- R...
CLICK HERE TO GET FULL ACCESS TO 1991 Suzuki Samurai DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Suzuki Samurai AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Suzuki Samurai cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Suzuki Samurai JS 1.3 L4 GAS
- Loosen wheel lug nuts, then raise and support vehicle. Position jack stands under axle housing.
- Remove lug nuts, then wheel assembly.
- Remove caliper carrier bolts, then support caliper with wire.
- Remove brake disc. If brake disc cannot be removed by hand, install two 8 mm bolts in holes provided, then tighten to remove disc.
- On models with free wheeling hubs, proceed as follows:
- Remove free wheeling hub cover attaching screws, then cover.
- Using needlenose pliers, remove free wheeling hub circlip, then free wheeling hub body.
- On models less free wheeling hub, proceed as follows:
- R...
CLICK HERE TO GET FULL ACCESS TO 1991 Suzuki Samurai DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Suzuki Samurai vehicle.
|
| Access the Complete guide! |
