Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Ford Aerostar car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Ford Aerostar automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Ford Aerostar
- 1993 Ford Aerostar 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 1993 Ford Aerostar 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:X
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford Aerostar AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Ford Aerostar cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Electronic Throttle Control ->
Vehicle: 1993 Ford Aerostar 3.0 V6 GAS
Electronic throttle displays when the system has malfunctioned and the engine has defaulted to a limp-home operation. On vehicles equipped with ...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Aerostar MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford Aerostar AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Ford Aerostar cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Check Engine Lamp -> 1993-97 -> Continuous Memory -> EEC -> EEC IV -> EEC V -> Except Malfunction Indicator Lamp (MIL) -> Keep Alive Memory (KAM) -> Keep Alive Memory (KAM) Reset & PCM Reset Less Electronic Tester -> Malfunction Indicator Light -> PCM Reset Using Generic Scan Tool
Vehicle: 1993 Ford Aerostar 4.0 V6 GAS
EEC
Except Malfunction Indicator Lamp (MIL)
When using NGS tool No. 007-00500, or equivalent, select Diagnostic Test Mode Results, then press CLEAR or disconnect battery ground cable. Codes will be erased from back-up memory after 24 hours.
Malfunction Indicator Light
- Activate diagnostic test mode.
- Disconnect diagnostic connector.
- Jump BL/W and GY/BL wires using suitable jumper wire.
- Wait about two seconds.
- Remove jumper wire and reconnect diagnostic connector.
- MIL will stay on, and codes will be erased.
EEC IV
Continuous Memory
This lamp should light when the ignition is turned On. After the engin...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Aerostar MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford Aerostar AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Ford Aerostar cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Check Fuel Cap Lamp ->
Vehicle: 1993 Ford Aerostar 4.0 V6 GAS
The Check Fuel Cap Lamp will illuminate momentarily when the ignition switch is placed in the On position as a bulb check. If the lamp remains...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Aerostar MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford Aerostar AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Ford Aerostar cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Rear Load Leveling (CHECK SUSP) ->
Vehicle: 1993 Ford Aerostar 4.0 V6 GAS
The CHECK SUSP indicator lights when there is a fault of the rear load ...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Aerostar MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford Aerostar AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Ford Aerostar cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Emission Maintenance Reminder Indicator ->
Vehicle: 1993 Ford Aerostar 3.0 V6 GAS
This lamp should light after approximately 60,000 miles of operation, Fig. . The amber lens lamp is located on the instrument panel and has the word Emissions, Emiss or EGR printed on it. After performing the required emission control maintenance, the module must be replaced or reset, depending on type of module used. On module equipped with reset feature, reset the module as follows:
- Turn ignition Off.
- On Aerostar models, the module is located under the instrument panel near the bulkhead connector.
- On Bronco, Explorer and F-Series, the module is attached to the instrument cluster to the left of ...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Aerostar MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford Aerostar AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Ford Aerostar cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Check Gauge Warning Lamp ->
Vehicle: 1993 Ford Aerostar 4.0 V6 GAS
This indicator should light if any of the following conditions appear:
- Engine oil pressure drops below approxi...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Aerostar MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Ford Aerostar vehicle.
|
| Access the Complete guide! |
