Auto Parts Search
1993 Ford Bronco CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Ford REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
A/C & HEATER SERVICE PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
Cooling System Capacities -> Ford Motor Co. Light Trucks & Vans -> 1992-96 Ford Bronco & 1992-2002 F Series
Vehicle: 1993 Ford Bronco 5.8 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
Drum Brakes -> Aerostar, Bronco, Explorer, E-150, F-150 & Ranger -> Inspection -> Adjuster Mechanism -> Backing Plate -> Brake Drums -> Brake Linings & Springs -> Parking Brake Cable
Vehicle: 1993 Ford Bronco 5.0 V8 GAS
Brake Drums
Any time brake drums are removed for brake service, braking surface diameter should be checked with a suitable micrometer at several points to determine if they are within the safe oversize limit stamped on the brake drum outer surface. If braking surface diameter exceeds specifications, the drum must be replaced. If braking surface diameter is within specifications, drums should be cleaned and inspected for cracks, scores, deep grooves, taper, out of round and heat spotting. If drums are cracked or heat spotted, they must be replaced.
Minor scores should be removed with sa...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
Ford Motor Co. Light Trucks, SUVs & Vans -> Fuel Pressure Relief -> Gasoline Fuel Injected Engines Except Escape, Freestar, Mariner, Monterey, Villager, 2005-06 Aviator, Explorer & Mountaineer, 2005-06 Expedition & Navigator & 2004-06 F150 & Mark LT
Vehicle: 1993 Ford Bronco 5.8 V8 GAS
The fuel system remains under high pressure even when the engine is not running. This residual pressure must be relieved before servicing the fuel system. To avoid injury or fire, release pressure from the fuel system before disconnecting any fuel line.
The fuel system pressure must be relieved prior to disconnecting fuel lines to prevent accidental spray of fuel.
After the battery ...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 1993 Ford Bronco 5.8 V8 GAS
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 30 ft. lbs.
- Torque U-joint retainer bolts to 16 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
Alternator, Replace
Vehicle: 1993 Ford Bronco 5.8 V8 GAS
- Disconnect battery ground cable.
- Remove air cleaner assembly, if required.
- Disconnect wire harness connectors from voltage regulator.
- Remove accessory drive belt.
- Remove alternator mounting bolts, th...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
Ford Motor Co. Trucks -> Air Bag Warning Lamp ->
Vehicle: 1993 Ford Bronco 5.0 V8 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the Air Bag warning ...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
Radiator, Replace
Vehicle: 1993 Ford Bronco 5.8 V8 GAS
- Drain cooling system into a suitable container by removing radiator cap and opening draincock located at the lower rear corner of the radiator tank.
- Remove rubber radiator overflow hose from radiator coolant recovery reservoir and disconnect it from radiator, Fig. .
- Remove fan shroud upper attaching screws.
- Lift fan shroud out of lower retaining clips and drape it on fan.
- Loosen upper and lower hose clamps at radiator and remove upper radiator hose and lower radiator fr...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1993 Ford Bronco AUTOMOBILES
Serpentine Drive Belt, Replace -> Automatic Tension -> Manual Tension
Vehicle: 1993 Ford Bronco 5.0 V8 GAS
Automatic Tension
- Install suitable 5/16 inch closed end wrench on tensioner pulley bolt, then lift tensioner arm away from belt. Do not use socket and ratchet.
- Remove belt, slowly release tensioner. Do not allow tensioner to snap back, as damage may result.
- Reverse procedure to install.
Manual Tension
- Loosen accessory adjustment bolt and pivot bolt.
- Remove belt.
- Reverse procedure to install, adjust belt tension as follows:
- Lo...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1993 Ford Bronco AUTOMOBILES
Component location diagrams for most 1993 Ford Bronco cars and light trucks sold in the U.S. from 1990+.
Body Components Diagram for 1993 Ford Bronco 5.0 V8 GAS Components on diagram: |
Body Components Diagram for 1993 Ford Bronco 5.0 V8 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1993 Ford Bronco AUTOMOBILES
OEM drawn wiring diagrams for most 1993 Ford Bronco cars and light trucks sold in the U.S.
1993 Ford Bronco 5.8 V8 GAS Wiring Diagram Components on diagram: |
1993 Ford Bronco 5.0 V8 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1993 Ford Bronco AUTOMOBILES
OEM TSB listings for most 1993 Ford Bronco cars and light trucks sold in the U.S. from 1985+.
Document: RECALL - FUSED JUMPER HARNESS REPLACEMENT FOR VEHICLES SERVICED WITH AN INCOMPATIBLE FUSED JUMPER HARNESS Vehicle: 1993 Ford Bronco 5.0 V8 GAS Auto Systems: |
Document: RECALL - CERTAIN 1992-2003 MODEL YEAR CARS AND TRUCKS - FUSED JUMPER HARNESS REPLACEMENT FOR VEHICLES SERVICED WITH AN INCOMPATIBLE FUSED JUMPER HARNESS Vehicle: 1993 Ford Bronco 5.0 V8 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1993 Ford Bronco AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1993 Ford Bronco cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1993 Ford Bronco cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1993 Ford Bronco cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1993 Ford Bronco cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Bronco SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Ford Bronco vehicle. |
Access the Complete guide! |