Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Ford Probe car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Ford Probe automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Ford Probe
- 1993 Ford Probe GT 2.5 V6 GAS, CC:2450, CID:152, Fuel Injection, Aspiration:152, Engine VIN:, Desg:B
- 1993 Ford Probe SE 2.0 L4 GAS, CC:1989, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:A
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Ford Probe AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Ford Probe cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Ford Probe SE 2.0 L4 GAS
When removing both Lefthand front wheel driveshaft and joint and Righthand front wheel driveshaft and joint, Transaxle Plugs T88C-7025-AH must be installed. Failure to use this tool can result in dislocation of differential side gears on 4EAT and MTX equipped vehicles. Should differential side gears become misaligned, differential will have to be removed from transaxle to re-align differential side gears.
- Raise and support vehicle.
- Remove lug nut and wheel and tire assembly.
- Carefully raise staked portion of front axle wheel hub retainer by using a small cape chisel and a ha...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Probe DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Ford Probe AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Ford Probe cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Ford Probe GT 2.5 V6 GAS
When removing both Lefthand front wheel driveshaft and joint and Righthand front wheel driveshaft and joint, Transaxle Plugs T88C-7025-AH must be installed. Failure to use this tool can result in dislocation of differential side gears on 4EAT and MTX equipped vehicles. Should differential side gears become misaligned, differential will have to be removed from transaxle to re-align differential side gears.
- Raise and support vehicle.
- Remove lug nut and wheel and tire assembly.
- Carefully raise staked portion of front axle wheel hub retainer by using a small cape chisel and a ha...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford Probe DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Ford Probe vehicle.
|
| Access the Complete guide! |
