Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Honda Prelude car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Honda Prelude automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Honda Prelude
- 1993 Honda Prelude S 2.2 L4 GAS, CC:2156, Fuel Injection
- 1993 Honda Prelude SI 2.3 L4 GAS, CC:2259, Fuel Injection
- 1993 Honda Prelude 4WS 2.3 L4 GAS, CC:2259, Fuel Injection
- 1993 Honda Prelude Vtec 2.2 L4 GAS, CC:2156, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1993 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> Description -> Accumulator -> Control Unit -> Master Cylinder -> Modulator Unit -> Operation -> Power Unit -> Pressure Switch -> Speed Sensor -> System Components
Vehicle: 1993 Honda Prelude 4WS 2.3 L4 GAS
Operation
The anti-lock brake system (ABS), Figs. through , modulates the pressure of the brake fluid applied to each caliper. This prevents the wheels from locking, whenever they are likely to be locked due to excessive braking. It then restores normal hydraulic pressure when there is no longer any possibility of wheel locking. The system has a fail safe function that allows normal braking if there is a problem within the system.
System Components
Master Cylinder
A tandem master cylinder is used in order to improve safety of the braking system. In addition, a center valve method is in...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Prelude cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Master Cylinder Overhaul -> Wheel Cylinder Overhaul
Vehicle: 1993 Honda Prelude S 2.2 L4 GAS
Master Cylinder Overhaul
All master cylinders are not serviceable and mu...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1993 -> 1993 Accord -> 1994-96 -> 1994-96 Accord -> Accord -> Accumulator -> Accumulator Disposal -> Brake Fluid Change -> Brake System Bleed -> Civic -> Civic & Civic del Sol -> Civic del Sol -> Civic, Civic del Sol, Prelude & 1993 Accord -> Component Replacement -> Control Unit -> Front -> Front Speed Sensor -> Modulator -> Odyssey -> Odyssey & 1994-96 Accord -> Power Unit -> Prelude -> Prelude & 1993 Accord -> Pulser & Sensor Gap Measurement -> Rear -> Rear Speed Sensor -> System Pressure Relief
Vehicle: 1993 Honda Prelude SI 2.3 L4 GAS
System Pressure Relief
Odyssey & 1994-96 Accord
- Remove bleeder cap from maintenance bleeder on modulator unit, then attach a suitable wrench to bleeder.
- Connect a rubber tube to bleeder and place other end in a container, Fig. .
- While holding tube in hand, loosen maintenance bleeder 1/8 to 1/4 turn and collect fluid in container. Do not loosen bleeder too much; brake fluid is under high pressure and can burst out.
- Tighten maintenance bleeder to specification.
Civic, Civic del Sol, Prelude & 1993 Accord
- Drain brake fluid from master cylinder and modulator reservoir thoroug...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1993 Accord -> Civic & Civic del Sol -> Odyssey & 1994-96 Accord -> Prelude -> Self Diagnosis
Vehicle: 1993 Honda Prelude S 2.2 L4 GAS
Self Diagnosis
Refer to wiring circuits Figs. through when diagnosing the anti-lock brake system.
Prelude
- Turn ignition switch on and ensure anti-lock warning light comes on.
- Start engine and check anti-lock warning light. If light goes off, there is no problem with anti-lock brake system. If light comes on, continue test.
- Stop engine and disconnect service check connector from connector cover located under front of center console.
- Connect both terminals of service check connector with a jumper wire, Fig. .
- Turn ignition switch on and record blinking frequency of anti-lock...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Prelude cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Installation -> Rear -> Removal
Vehicle: 1993 Honda Prelude S 2.2 L4 GAS
Front
Removal
- Refer to Figs. through when replacing brake pads.
- Raise and support front of vehicle, then remove wheel and tire assemblies.
- Remove brake hose clamp bolts from steering knuckle, Fig. .
- Remove caliper bolt, then swing caliper up out of the way.
- Remove shims, retainers and brake pads.
Installation
- Using vernier caliper, measure thickness of each pad lining. Compare measurement with specifications. If brake lining thickness is less than specified, replace both pads as a set.
- Clean caliper thoroughly, and check for grooves or cracks. Repair or replace as necessary.
- I...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1993 Honda Prelude cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1993 Honda Prelude Vtec 2.2 L4 GAS
Do not mix different brands of brake fluid, as they may not be compatible. Use only DOT 3 or 4 brake fluid.
Ensure brake fluid level in reservoir is at MAX (upper) level line.
- Have an assistant slowly pump brake pedal several times, then hold steady pressure.
- Loosen brake bleed screw to allow air to es...
CLICK HERE TO GET FULL ACCESS TO 1993 Honda Prelude BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Honda Prelude vehicle.
|
| Access the Complete guide! |
