Auto Parts Search

We have info for following modifications of 1995 Nissan 240SX
- 1995 Nissan 240SX SE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:A
- 1995 Nissan 240SX 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:A
BRAKE SERVICE PROCEDURES FOR 1995 Nissan 240SX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan 240SX cars and light trucks from 1990+.
DRUM BRAKES -> BRAKE SERVICE -> Altima -> Maxima -> Pathfinder & Pickup -> Quest -> Sentra, NX 1600, NX 2000 & 200SX
Vehicle: 1995 Nissan 240SX 2.4 L4 GAS
Altima
- Raise and support rear of vehicle, then remove rear wheel.
- Fully release parking brake.
- Remove brake drum, if drum is hard to remove, proceed as follows:
- Remove plug from rear side of backing plate.
- Using a suitable tool, push stopper towards backing plate to gain clearance between brake shoe and drum as shown in Fig. .
- Install two bolts into outside of brake drum as shown in Fig. , then gradually tighten the two bolts until drum separates from the brake shoes.
- Push in shoe hold-down pins from behind backing plate, Fig. .
- Pull out brake shoes.
- Using pliers, remove lower...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan 240SX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan 240SX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan 240SX cars and light trucks from 1990+.
DRUM BRAKES -> BRAKE SERVICE -> Altima -> Maxima -> Pathfinder & Pickup -> Quest -> Sentra, NX 1600, NX 2000 & 200SX
Vehicle: 1995 Nissan 240SX SE 2.4 L4 GAS
Altima
- Raise and support rear of vehicle, then remove rear wheel.
- Fully release parking brake.
- Remove brake drum, if drum is hard to remove, proceed as follows:
- Remove plug from rear side of backing plate.
- Using a suitable tool, push stopper towards backing plate to gain clearance between brake shoe and drum as shown in Fig. .
- Install two bolts into outside of brake drum as shown in Fig. , then gradually tighten the two bolts until drum separates from the brake shoes.
- Push in shoe hold-down pins from behind backing plate, Fig. .
- Pull out brake shoes.
- Using pliers, remove lower...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan 240SX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan 240SX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan 240SX cars and light trucks from 1990+.
POWER BRAKE UNITS -> ADJUSTMENTS -> Output Rod
Vehicle: 1995 Nissan 240SX 2.4 L4 GAS
Output Rod
- Apply 19.96 inch HG of vacuum to brake booster using a suitable vacuum pump, Fig. .
- Check output rod length as shown in Fig. .
- On 1993 NX1600, NX2000 and Sent...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan 240SX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan 240SX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan 240SX cars and light trucks from 1990+.
POWER BRAKE UNITS -> TROUBLESHOOTING
Vehicle: 1995 Nissan 240SX 2.4 L4 GAS
- With engine off, depress brake pedal several times. There should be no change in pedal stroke.
- With brake pedal depressed, start engine. Pedal should go down slightly.
- Run engine for two minutes, then turn engine off. Depress brake pedal slowly several times.
- Pe...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan 240SX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan 240SX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan 240SX cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> COMPONENT SERVICE -> Altima, NX 1600, NX 2000, Sentra & 200SX -> Cleaning & Inspection -> Master Cylinder Overhaul -> Maxima -> Overhaul -> Pathfinder & Pickup -> Proportioning Valve -> Quest -> Service -> Testing
Vehicle: 1995 Nissan 240SX 2.4 L4 GAS
Master Cylinder Overhaul
Overhaul
Refer to Figs. through , for master cylinder overhaul procedures, noting the following:
- If piston assembly is stuck in cylinder bore, gradually apply air to fluid outlet port.
- Replace stopper cap if claws are damaged. Bend claw inward when installing new stopper.
Cleaning & Inspection
Examine reservoirs for foreign matter and check all passages for restrictions. If there is any indication of contamination or evidence of corrosion, service the hydraulic system as needed.
When disassembled, wash all parts in denatured alcohol or clean brake fluid. Use...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan 240SX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Nissan 240SX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Nissan 240SX cars and light trucks from 1990+.
Anti-lock Brakes -> Ground Circuit Check -> Actuator Motor Ground -> Altima -> Relay Box Ground
Vehicle: 1995 Nissan 240SX SE 2.4 L4 GAS
Actuator Motor Ground
When performing actuator motor ground circuit check, refer to Figs. through . Resistance between both terminals ...
CLICK HERE TO GET FULL ACCESS TO 1995 Nissan 240SX BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |