Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1995 Suzuki Esteem car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1995 Suzuki Esteem automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1995 Suzuki Esteem
- 1995 Suzuki Esteem GL 1.6 L4 GAS, CC:1590, CID:97, Fuel Injection, Aspiration:97, Engine VIN:, Desg:3
- 1995 Suzuki Esteem GLX 1.6 L4 GAS, CC:1590, CID:97, Fuel Injection, Aspiration:97, Engine VIN:, Desg:3
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Suzuki Esteem AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Suzuki Esteem cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Double Offset Joint -> Left Side -> Right Side -> Tripod Joint
Vehicle: 1995 Suzuki Esteem GLX 1.6 L4 GAS
Double Offset Joint
Left Side
- Raise and support vehicle.
- Remove tires and wheels.
- Undo staking and remove drive shaft nut and washer.
- Place a suitable container under transaxle and drain transaxle oil.
- By using proper size rods, pull out drive shaft joint so as to release snap ring fitting of joint spline at differential side.
- Disconnect stabilizer joint from suspension arm.
- Remove ball stud bolt, and then separate suspension arm from knuckle.
- To remove drive shaft assembly, pull out inboard joint from differential side and then wheel side joint from steering knuckle.
- Reverse proce...
CLICK HERE TO GET FULL ACCESS TO 1995 Suzuki Esteem DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1995 Suzuki Esteem AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1995 Suzuki Esteem cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Double Offset Joint -> Left Side -> Right Side -> Tripod Joint
Vehicle: 1995 Suzuki Esteem GL 1.6 L4 GAS
Double Offset Joint
Left Side
- Raise and support vehicle.
- Remove tires and wheels.
- Undo staking and remove drive shaft nut and washer.
- Place a suitable container under transaxle and drain transaxle oil.
- By using proper size rods, pull out drive shaft joint so as to release snap ring fitting of joint spline at differential side.
- Disconnect stabilizer joint from suspension arm.
- Remove ball stud bolt, and then separate suspension arm from knuckle.
- To remove drive shaft assembly, pull out inboard joint from differential side and then wheel side joint from steering knuckle.
- Reverse proce...
CLICK HERE TO GET FULL ACCESS TO 1995 Suzuki Esteem DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
