Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Chevrolet Corvette
- 1996 Chevrolet Corvette 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:P
- 1996 Chevrolet Corvette 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:5
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Chevrolet Corvette AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Chevrolet Corvette cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1996 Chevrolet Corvette 5.7 V8 GAS
- With transmission in neutral and parking brake released, raise and support vehicle, then remove underbody braces, as required.
- Remove exhaust system as follows:
- Disconnect AIR pipe from catalytic converter and exhaust pipe.
- Disconnect electrical connector to oxygen sensor.
- Remove bolts securing muffler to hangers, disconnect exhaust pipes from manifolds and remove exhaust system as an assembly.
- Support transmission, remove support beam retaining bolts and support beam.
- Mark position o...
CLICK HERE TO GET FULL ACCESS TO 1996 Chevrolet Corvette DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Chevrolet Corvette AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Chevrolet Corvette cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1996 Chevrolet Corvette 5.7 V8 GAS
- With transmission in neutral and parking brake released, raise and support vehicle, then remove underbody braces, as required.
- Remove exhaust system as follows:
- Disconnect AIR pipe from catalytic converter and exhaust pipe.
- Disconnect electrical connector to oxygen sensor.
- Remove bolts securing muffler to hangers, disconnect exhaust pipes from manifolds and remove exhaust system as an assembly.
- Support transmission, remove support beam retaining bolts and support beam.
- Mark position o...
CLICK HERE TO GET FULL ACCESS TO 1996 Chevrolet Corvette DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |




