Auto Parts Search
We have info for following modifications of 1996 Ford Contour
- 1996 Ford Contour GL 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1996 Ford Contour GL 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour GL 2.0 L4 BI-FUEL, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:Z
- 1996 Ford Contour LX 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1996 Ford Contour LX 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour SE 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour Sport 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1996 Ford Contour Sport 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour Sport 2.0 L4 BI-FUEL, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:Z
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1996 Ford Contour Sport 2.0 L4 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To avoid damage to CV joints and boots, do not bend inner CV ...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1996 Ford Contour GL 2.0 L4 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To avoid damage to CV joints and boots, do not bend inner CV ...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1996 Ford Contour Sport 2.5 V6 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To avoid damage to CV joints and boots, do not bend inner CV ...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1996 Ford Contour LX 2.0 L4 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To avoid damage to CV joints and boots, do not bend inner CV ...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1996 Ford Contour GL 2.0 L4 BI-FUEL
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To avoid damage to CV joints and boots, do not bend inner CV ...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1996 Ford Contour GL 2.5 V6 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To avoid damage to CV joints and boots, do not bend inner CV ...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Ford Contour vehicle. |
Access the Complete guide! |