Auto Parts Search
We have info for following modifications of 1996 Ford Contour
- 1996 Ford Contour GL 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1996 Ford Contour GL 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour GL 2.0 L4 BI-FUEL, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:Z
- 1996 Ford Contour LX 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1996 Ford Contour LX 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour SE 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour Sport 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1996 Ford Contour Sport 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1996 Ford Contour Sport 2.0 L4 BI-FUEL, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:Z
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1996 Ford Contour GL 2.5 V6 GAS
- Disconnect battery ground cable.
- Disengage alternator drive belt from alternator pulley.
- Raise and support vehicle, then remove righthand wheel and tire.
- Remove righthand outer tie rod end from righthand spindle.
- Remove front and rear Y pipe flange fasteners from exhaust manifolds.
- Remove stud bolt and nut retainer from oil pan, then remove remaining nuts and bolts from U pipe outlet connection.
- Discard exhaust converter inlet gasket, then remove Y pipe.
- Disconnect wire harness attachment...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1996 Ford Contour SE 2.5 V6 GAS
- Disconnect battery ground cable.
- Loosen engine air cleaner tube clamps on air cleaner outlet tube.
- Disconnect crankcase ventilation hoses and IAC valve tube from air cleaner outlet tube fitting.
- Remove air cleaner outlet tube from mass air flow sensor and throttle body.
- Disconnect engine control sensor wiring connector from mass air flow sensor and intake air temperature sensor.
- Remove engine air cleaner to body O-ring retainer.
- Remove air cleaner body and engine air cleaner intake tube from bracket and engine cleaner intake tube and duct, as one piece.
- Remove fuel supply and return l...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1996 Ford Contour Sport 2.0 L4 BI-FUEL
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove engine air intake resonators from air cleaner assembly.
- Lower vehicle, then remove upper starter motor mounting bolt.
- Raise and support vehicle, then remove B-terminal and S-terminal nu...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1996 Ford Contour Sport 2.5 V6 GAS
- Disconnect battery ground cable.
- Loosen engine air cleaner tube clamps on air cleaner outlet tube.
- Disconnect crankcase ventilation hoses and IAC valve tube from air cleaner outlet tube fitting.
- Remove air cleaner outlet tube from mass air flow sensor and throttle body.
- Disconnect engine control sensor wiring connector from mass air flow sensor and intake air temperature sensor.
- Remove engine air cleaner to body O-ring retainer.
- Remove air cleaner body and engine air cleaner intake tube from bracket and engine cleaner intake tube and duct, as one piece.
- Remove fuel supply and return l...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1996 Ford Contour LX 2.5 V6 GAS
- Disconnect battery ground cable.
- Loosen engine air cleaner tube clamps on air cleaner outlet tube.
- Disconnect crankcase ventilation hoses and IAC valve tube from air cleaner outlet tube fitting.
- Remove air cleaner outlet tube from mass air flow sensor and throttle body.
- Disconnect engine control sensor wiring connector from mass air flow sensor and intake air temperature sensor.
- Remove engine air cleaner to body O-ring retainer.
- Remove air cleaner body and engine air cleaner intake tube from bracket and engine cleaner intake tube and duct, as one piece.
- Remove fuel supply and return l...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Ford Contour AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Ford Contour cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1996 Ford Contour Sport 2.0 L4 GAS
- Disconnect battery ground cable.
- Disconnect engine air intake resonators.
- Remove mass airflow sensor and air cleaner outlet tube assembly from throttle body and air cleaner assembly.
- Disconnect wire harness attachments to alternator assembly, then raise and support vehicle.
- Remove alternator drive belt from alternator pulley, then alternator mounting bracket bolts and alternator bracket.
- Lower veh...
CLICK HERE TO GET FULL ACCESS TO 1996 Ford Contour STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Ford Contour vehicle. |
Access the Complete guide! |