Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Mazda Protege car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Mazda Protege automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Mazda Protege
- 1996 Mazda Protege LX 1.5 L4 GAS, CC:1489, Fuel Injection
- 1996 Mazda Protege DX 1.5 L4 GAS, CC:1489, Fuel Injection
- 1996 Mazda Protege ES 1.8 L4 GAS, CC:1839, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mazda Protege AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mazda Protege cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mazda Protege ES 1.8 L4 GAS
- Raise and support vehicle, then remove wheel and tires.
- Remove splash shield, then transaxle drain plug.
- Raise staked portion of driveshaft locknut using suitable tool.
- Apply brakes, then loosen and remove locknut.
- Remove stabilizer, then tie rod ends using tool No. 490118850C or equivalent.
- Remove lower ball joint attaching bolt.
- Remove driveshaft clinch bolt and nut, pry down on lower arm to disconnect ball joint.On vehicles equipped with autom...
CLICK HERE TO GET FULL ACCESS TO 1996 Mazda Protege DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mazda Protege AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mazda Protege cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mazda Protege LX 1.5 L4 GAS
- Raise and support vehicle, then remove wheel and tires.
- Remove splash shield, then transaxle drain plug.
- Raise staked portion of driveshaft locknut using suitable tool.
- Apply brakes, then loosen and remove locknut.
- Remove stabilizer, then tie rod ends using tool No. 490118850C or equivalent.
- Remove lower ball joint attaching bolt.
- Remove driveshaft clinch bolt and nut, pry down on lower arm to disconnect ball joint.On vehicles equ...
CLICK HERE TO GET FULL ACCESS TO 1996 Mazda Protege DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mazda Protege AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mazda Protege cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mazda Protege DX 1.5 L4 GAS
- Raise and support vehicle, then remove wheel and tires.
- Remove splash shield, then transaxle drain plug.
- Raise staked portion of driveshaft locknut using suitable tool.
- Apply brakes, then loosen and remove locknut.
- Remove stabilizer, then tie rod ends using tool No. 490118850C or equivalent.
- Remove lower ball joint attaching bolt.
- Remove driveshaft clinch bolt and nut, pry down on lower arm to disconnect ball joint.On vehicles equ...
CLICK HERE TO GET FULL ACCESS TO 1996 Mazda Protege DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
