Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Suzuki Sidekick car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Suzuki Sidekick automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Suzuki Sidekick
- 1996 Suzuki Sidekick JS 1.6 L4 GAS, CC:1590, CID:97, Fuel Injection, Aspiration:97, Engine VIN:, Desg:0
- 1996 Suzuki Sidekick JX 1.6 L4 GAS, CC:1590, CID:97, Fuel Injection, Aspiration:97, Engine VIN:, Desg:0
- 1996 Suzuki Sidekick JA 1.6 L4 GAS, CC:1590, CID:97, Fuel Injection, Aspiration:97, Engine VIN:, Desg:0
- 1996 Suzuki Sidekick Sport 1.8 L4 GAS, CC:1840, Fuel Injection, Engine VIN:, Desg:2
BRAKE SERVICE PROCEDURES FOR 1996 Suzuki Sidekick AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Suzuki Sidekick cars and light trucks from 1990+.
Anti-lock Brakes -> ABS-VI -> System Service -> ABS Hydraulic Modulator & Master Cylinder Assembly -> ABS Hydraulic Modulator Gears -> ABS Hydraulic Modulator Solenoid Assembly -> ABS Lamp Driver Module -> Adjustments -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Enable Relay -> Front Wheel Speed Sensor -> Inspection -> Manual Bleeding -> Pressure Bleeding -> Rear Wheel Speed Sensor -> Wheel Bleed Sequence
Vehicle: 1996 Suzuki Sidekick JA 1.6 L4 GAS
Brake System Bleed
Inspection
The hydraulic lines of this brake system are based on a diagonal split system. When a brake line or hose is disconnected, bleeding operation must be performed at both ends of the line disconnected.
Prior to bleeding brakes, both front and rear displacement cylinder pistons must be returned to the top-most or home position. Motor re-home cannot be performed if current diagnostic trouble codes (DTC) are present. If DTC's are present, vehicle must be repaired and DTC's cleared before performing the motor rehome function. Perform this procedure as follows:
- R...
CLICK HERE TO GET FULL ACCESS TO 1996 Suzuki Sidekick BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Suzuki Sidekick AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Suzuki Sidekick cars and light trucks from 1990+.
Anti-lock Brakes -> Rear Wheel Anti-Lock -> Description
Vehicle: 1996 Suzuki Sidekick JX 1.6 L4 GAS
On Sidekick models, the Rear Wheel Anti-Lock (RWAL) system is controlled by the rear hydraulic brake line pressure which is regulated by a pressure limit valve. The pressure limit valve is located under the master cylinder and consists of two valves. One is a dump valve which releases pressure into an accumulator and the other is an isolation valve which holds rear brake pressure. The valve is controlled by a microcomputer which is a part of the RWAL control module. The RWAL control module is installed near the fuse box located under...
CLICK HERE TO GET FULL ACCESS TO 1996 Suzuki Sidekick BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Suzuki Sidekick AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Suzuki Sidekick cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Service Brake
Vehicle: 1996 Suzuki Sidekick JX 1.6 L4 GAS
Service Brake
These brakes are self-adjusting, but do require adjustment for proper drum to shoe clearance when brake shoe has been replaced o...
CLICK HERE TO GET FULL ACCESS TO 1996 Suzuki Sidekick BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Suzuki Sidekick AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Suzuki Sidekick cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder, Replace
Vehicle: 1996 Suzuki Sidekick JA 1.6 L4 GAS
Master Cylinder, Replace
- Clean any dirt from around reservoir cap. Remove cap, then drain brake fluid into appropriate container.
- Remove reservoir connector screw, Fig. , then the reservoir.
- Disconnect brake lines from master cylinder. Do not allow brake fluid to get on painted surfaces.
- Remove master cylinder attaching bolts, then the master cylinder.
- Adjust clearance of booster piston rod to master cylinder piston as follows:
- Push piston rod several times to ensure reaction disc is in place.
- Measure with gasket in place on master cylinder and booster at atmospheric pressu...
CLICK HERE TO GET FULL ACCESS TO 1996 Suzuki Sidekick BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Suzuki Sidekick AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Suzuki Sidekick cars and light trucks from 1990+.
Anti-lock Brakes -> Rear Wheel Anti-Lock -> System Service -> 4WD Switch -> Brake System Bleed -> Component Replacement -> RWAL Control Module -> Service Precautions -> Sidekick -> Wheel Speed Sensor
Vehicle: 1996 Suzuki Sidekick JA 1.6 L4 GAS
Service Precautions
Before performing any repairs on the ABS system, note the following precautions:
- If any welding work is to be done on the vehicle using and arc welder, the EBCM and hydraulic modulator connectors should be disconnected.
- Hydraulic modulator and EBCM connectors should never be disconnected when the ignition switch is on.
- Do not use a fast charger to charge battery when battery is connected. Always disconnect battery from system before using a fast charger. Never disconnect battery from system with engine running.
- Always note routing, position and mounting of ...
CLICK HERE TO GET FULL ACCESS TO 1996 Suzuki Sidekick BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Suzuki Sidekick AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Suzuki Sidekick cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Esteem & Swift -> Master Cylinder Bleeding -> Samurai, Sidekick & X-90 -> System Bleeding
Vehicle: 1996 Suzuki Sidekick JX 1.6 L4 GAS
Brake fluid is extremely damaging to paint. If fluid should accidentally touch painted surface, immediately wipe fluid from paint and clean painted surface.
System Bleeding
Samurai, Sidekick & X-90
On Samurai models, bleeding is required at four places; both front wheels, P & B valve and left rear wheel cylinder, Fig. .
On Sidekick and X-90 models, bleeding is required at four places; both front wheels, pressure limit valve and left rear wheel cylinder, Fig. .
Esteem & Swift
The hydraulic lines of the brake system are based on a diagonal split system. When a brake line or hose is...
CLICK HERE TO GET FULL ACCESS TO 1996 Suzuki Sidekick BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
